VEVOR MIG-130 130A 110V 3-in-1 MIG/Stick/Lift TIG Welder

What this machine does

The VEVOR MIG-130 is a 130A multi-process welder that runs on 110V input power. It combines gasless MIG, MMA stick welding and lift TIG in a single unit weighing 14.1 lbs with dimensions of 12.6 x 5.9 x 9.8 inch. A digital display and synergic control automatically match current and wire feed speed to the selected wire diameter. The package includes a welding torch, ground clamp, 14AK welding gun, 1.1 lbs flux core wire, contact tips for 0.03 and 0.04 inch wire, a small wrench and a shoulder strap.

Who it suits and who it does not

Hobbyists and light fabricators who need a portable, single-voltage machine for flux core MIG and stick work up to 0.31 inch thickness will find it practical. The 2.2 lbs maximum spool capacity and 0.03/0.04 inch wire compatibility cover common DIY wire sizes. Buyers who need gas-shielded MIG with a larger spool, higher amperage for thicker plate, or a built-in TIG torch should look at other equipment. The 110V supply and 5.1 KVA input capacity set a firm ceiling on continuous output.

The specification that decides fit

Maximum output current is 130A at 5.1 KVA input capacity, which determines the thickest material you can weld in a single pass. The supplier rates welding thickness at 0.31 inch (8 mm) for the processes supported. If your typical work exceeds that thickness or demands a duty cycle above what a 110V 130A inverter can sustain, this model will not meet the requirement.