We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular steel magnetic lifter, chrome-plated hook and rubber-wrapped safety handle, N42 neodymium magnets, 3300 lbs capacity

VEVOR

VEVOR Magnetic Lifter 3300lbs 1500kg 2.5 Safety Factor N42 Neodymium Steel

SKU CH-937A-6F3K1

Permanent magnetic lifter lifts 3300 lbs with N42 neodymium magnets and a 2.5 safety factor for steel sheets, blocks and rods

  • TypeOther Appliances
  • Width8.07
  • Lifts 3300 lbs with N42 neodymium magnets
  • 5 safety factor exceeds load requirements
  • Chrome-plated hook resists rust and deformation
  • Safety handle prevents accidental activation
  • Operates from -40 °C to +80 °C

Industrial Magnetic Lifter 3300 lbs

This permanent magnetic lifter uses N42 neodymium magnets to lift ferromagnetic loads up to 3300 lbs or 1500 kg with a 2.5 safety factor. It suits workshops, fabrication shops and yards that move steel sheets, blocks, rods or cylindrical stock using a hoist or shop crane.

Installation And Common Issues

The unit weighs 81.6 lbs and measures 11.8 by 5.2 by 5.5 inches, so mechanical handling is needed to mount it on a crane hook. A chrome-plated hook and rubber-wrapped safety handle are fitted; the handle must be pressed before rotation to prevent accidental release, and the hex wrench supplied secures the hook during setup.

Limits Of Magnetic Lifting

Rated pull-off force exceeds 8260 lbs, but effective hold drops sharply on thin or curved surfaces; the specifications state a working sheet thickness range of 0.2 to 2.2 inches. Operation is certified from -40 to +176 degrees Fahrenheit, and the lifter only grips ferromagnetic materials.

Highlights

  • Lifts 3300 lbs with N42 neodymium magnets
  • 5 safety factor exceeds load requirements
  • Chrome-plated hook resists rust and deformation
  • Safety handle prevents accidental activation
  • Operates from -40 °C to +80 °C

Specifications

TypeOther Appliances
Width8.07

Questions about this item

How do I verify the lifter is holding securely after I engage the handle?

Engage the chrome-plated handle until the safety switch locks; a firm hold on steel sheet between .2 and 2.2 inches thick confirms the 3300 lbs rated capacity and 2.5 safety factor are active.

What comes in the package and what must I supply separately?

The box includes the magnetic lifter, one pair of gloves, and one hex wrench; you must provide the hoist, crane, or rigging hardware to attach to the 81.6 lbs unit.

Which model should I choose for lifting 1500 kg plates up to 55 mm thick?

The PML-1500 model is rated for 1500 kg with a sheet-thickness range of 5 to 55 mm, matching that requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.