VEVOR
VEVOR M1H-ZP5-254D-1 10-inch 15A 25in rip 5000RPM table saw
A 10-inch 15-amp table saw with a 25-inch rip capacity and 5000 RPM motor on a folding stand with wheels
- 15-amp motor delivers 5000 RPM for fast ripping
- 25-inch rip capacity handles wide sheet goods
- Bevel range from -60° to 60° for versatile angled cuts
- Folding stand with wheels enables easy jobsite transport
- Blade guard and dust shield improve operator safety
Jobsite table saw for woodworking
The VEVOR M1H-ZP5-254D-1 is a 10-inch table saw driven by a 15-amp motor that reaches 5000 RPM. It ships with a 40-tooth blade and a folding stand with wheels for portable jobsite use. The saw handles rip cuts up to 25 inches and cross cuts at 90 degrees to a depth of 3.3 inches.
Sustained cutting performance
The 1800 W motor maintains 5000 RPM no-load speed while ripping through various wood sizes. A full-length parallel fence with measuring guide rail supports repeatable rip cuts at the 25-inch capacity. Bevel capacity spans -60 to +60 degrees with a 2.2-inch maximum depth at 45 degrees.
120 V circuit limits
Operation at 120 V and 15 A draws the full rated capacity of a standard household circuit. The 0.1-inch blade kerf removes 2.8 mm of material per pass, which determines dado width. Users needing larger rip capacities, deeper bevel cuts, or three-phase power will need a different saw.
Highlights
- 15-amp motor delivers 5000 RPM for fast ripping
- 25-inch rip capacity handles wide sheet goods
- Bevel range from -60° to 60° for versatile angled cuts
- Folding stand with wheels enables easy jobsite transport
- Blade guard and dust shield improve operator safety
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the 15 Amp motor draw during all-day use?
The motor is rated at 1800 W on 120 V, so it draws the full 15 A under load and will need a circuit that can sustain that current continuously.
What electrical supply must the workshop already provide?
A standard 120 V, 60 Hz outlet on a 15 A or 20 A branch circuit is required; the saw plugs directly into it with no special wiring.
Will the 25 in rip fence align with my older 10 in blades and dado sets?
The saw accepts a 10 in blade with a 0.1 in tooth thickness and 40 teeth; dado width matches that kerf, so existing 10 in blades of the same kerf will fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
