VEVOR
VEVOR LA008H/LA051B 25 ft 30A NEMA 10-30P to 10-30R Dryer Extension Cord
A 25 ft 10 AWG pure copper extension cord rated 30 A at 125/250 V with NEMA 10-30P to 10-30R connectors for older dryers or Level 2 EV charging
- TypeOther Appliances
- Width11.81
- 25 ft reach lets you position the dryer where you need it
- 30 A pure copper conductors deliver full rated power without voltage drop
- STW jacket rated from -20 °C to 60 °C withstands rain sun and temperature extremes
- 10 AWG three-core construction handles 7500 W continuous load for safe operation
- NEMA 10-30P to 10-30R connectors fit pre-1996 three-prong dryer outlets and Level 2 EV chargers
25 ft 30A Dryer Extension Cord
This 25 ft NEMA 10-30P to 10-30R extension cord delivers 30 A at 125/250 V using 10 AWG pure copper conductors. It is built for older 3-prong dryer outlets common in pre-1996 buildings and can also extend a Level 2 EV charger when the current is limited to 30 A or below.
STW Weather-Resistant Build
The cord carries an STW insulation rating for outdoor exposure to rain, humidity and intense sunlight. A black non-woven fabric bag and a PVC cable tie are included for storage and tidy routing, while the coiled dimensions of 10.83 x 10.83 x 3.35 in keep the package compact.
Check Outlet and Current Limits
Verify that your wall receptacle and appliance plug are both NEMA 10-30 configuration before ordering. The cord is rated for 7500 W maximum and an operating range of -20 to 60 °C, so confirm your charger or dryer does not exceed the 30 A limit.
Highlights
- 25 ft reach lets you position the dryer where you need it
- 30 A pure copper conductors deliver full rated power without voltage drop
- STW jacket rated from -20 °C to 60 °C withstands rain sun and temperature extremes
- 10 AWG three-core construction handles 7500 W continuous load for safe operation
- NEMA 10-30P to 10-30R connectors fit pre-1996 three-prong dryer outlets and Level 2 EV chargers
Specifications
| Type | Other Appliances |
|---|---|
| Width | 11.81 |
Questions about this item
What current does the NEMA 10-30 connection support on this 25 ft cord?
The cord is rated for 30 amps at 125/250 volts, delivering up to 7500 watts through its 10 AWG pure copper conductors.
What are the coiled dimensions and weight for storage?
The cord measures 10.83 x 10.83 x 3.35 inches and weighs 7.72 lbs, and it includes a black non-woven bag and a PVC cable tie.
How do you connect the male and female ends, and what mistake should be avoided?
Plug the NEMA 10-30P male end into the wall outlet and the NEMA 10-30R female end into the appliance; ensure the charging current is set to 30 amps or below when used for EV charging.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



