We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red powder-coated hydraulic motorcycle lift table on four casters with foot pedal and safety lock

VEVOR

VEVOR JL-M03108 Motorcycle Lift Jack 1000 lbs 8.6-31 in 360° Swivel

SKU CH-BB0A-ZCPA6

Hydraulic motorcycle lift raises bikes up to 1000 lbs from 8.6 to 31 inches with 360° swivel casters and locking brakes

  • Width26.77
  • TypeFloor Jacks
  • Vehicle TypeAutomotive
  • Lifts up to 1000 lbs for heavy motorcycles
  • Hydraulic foot pedal raises bike with minimal effort
  • Adjustable height from 8.6 to 31 inches fits many tasks
  • Four casters with 360° swivel and locking brakes enable easy positioning
  • Powder-coated Q235B steel frame resists corrosion and supports 6.5 t thrust

Capacity and Construction

This hydraulic motorcycle lift table supports a maximum load of 1000 lbs and is built from Q235B steel with a powder-coat finish. The work platform measures 78.7 by 21.7 inches and 0.1 inch thick, weighing 254.4 lbs. A safety pin and rear release plate are included for secure positioning during service.

Height Range and Operation

The jack adjusts from a minimum height of 8.6 inches to a maximum of 31 inches using a foot-pedal hydraulic pump with an 85 mm cylinder and 100 mm stroke. The pump delivers 6.5 t of thrust with a leak-proof design for stable lifting across the full range.

Mobility and Locking

Four casters provide movement: two 360° swivel wheels at 42 mm diameter and two directional wheels at 89 mm diameter. Two locking brakes hold the unit stationary when the bike is raised, allowing the lift to be repositioned easily around the workshop.

Highlights

  • Lifts up to 1000 lbs for heavy motorcycles
  • Hydraulic foot pedal raises bike with minimal effort
  • Adjustable height from 8.6 to 31 inches fits many tasks
  • Four casters with 360° swivel and locking brakes enable easy positioning
  • Powder-coated Q235B steel frame resists corrosion and supports 6.5 t thrust

Specifications

Width26.77
TypeFloor Jacks
Vehicle TypeAutomotive

Questions about this item

Will the 8.6 in minimum height slide under my low-clearance cruiser?

Yes, the platform sits at 8.6 in (218 mm) when fully lowered, so it clears most cruisers and touring bikes without needing blocks.

How do I confirm the hydraulic pump is holding pressure after I lift the bike?

Raise the jack to the desired height, engage the safety pin, then watch the platform — it should stay at that level without sinking or leaking fluid.

What hardware comes in the box and what must I supply?

The package includes the manual, rear release plate, ten M10×25 screws with washers and nuts, one M18×80 screw with M8 washer and spring washer, and a safety pin; no extra tools or fasteners are required for assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.