VEVOR
VEVOR JKC-300 commercial kitchen appliance 550W 1600 RPM 23kg
A 550W commercial food processor with 1600 RPM motor and six detachable cutting disks for shredding and slicing vegetables
- TypeOther Appliances
- Food-grade stainless steel and cast aluminium construction for hygienic durability
- 550 W motor drives cutting disks at 270 r/min for high throughput
- Two feeding holes plus six interchangeable disks cover shred and slice needs
- Magnetic safety switch stops the motor instantly when the hopper opens
- Non-slip rubber feet and transparent switch cover add operator security
Commercial food processor for high-volume prep
The VEVOR JKC-300 is a 550W electric vegetable cutter built for commercial kitchens that need consistent slicing and shredding. Its 1600 RPM motor drives cutting disks at 270 RPM to handle large batches quickly. Two feeding holes accommodate different vegetable sizes for continuous workflow.
Stainless steel and cast aluminium construction
Food-grade stainless steel and silver-anodised cast aluminium alloy form the main body, while rubber feet keep the 23kg unit stable on the bench. A magnetic security switch stops the motor instantly when the hopper is opened. The transparent ON/OFF cover adds protection during cleaning, and the supplied feeding bar shields fingers from the blades.
Belt-driven disks at 270 RPM
Six detachable disks provide 3mm, 4mm and 7mm shred plus 2mm and 4mm slice settings for varied textures. The belt drive transmits power from the 550W motor to the disks at a steady 270 RPM. A scraping bowl and cleaning brush are included for quick changeovers between tasks.
Highlights
- Food-grade stainless steel and cast aluminium construction for hygienic durability
- 550 W motor drives cutting disks at 270 r/min for high throughput
- Two feeding holes plus six interchangeable disks cover shred and slice needs
- Magnetic safety switch stops the motor instantly when the hopper opens
- Non-slip rubber feet and transparent switch cover add operator security
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What voltage does the 550W motor require?
The motor runs on a 110V supply and draws 550W at full load.
How much bench space and weight should I allow for the JKC-300?
The unit weighs 23kg (50.7 lbs) and has rubber feet for stable placement on a flat countertop.
How do I fit the cutting disks and belt without skipping the safety step?
Install the chosen disk onto the shaft, loop the belt over the motor and disk pulleys, then close the hopper so the magnetic switch engages before powering on.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
