We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black painted hydraulic cylinder with two hoses and check valve, adjustable length nineteen to twenty-eight inches

VEVOR

VEVOR Hydraulic Top Link Cat. 2-28 19-11/16~28 in Cylinder 2 Hoses G3/8" Check Valve

SKU CH-GWNB-P9TYR

Hydraulic top link for Cat. 2 tractors extends from 19 to 28 inches with 4-ton push force and G3/8" check valve

  • TypeOther Appliances
  • Width8.27
  • Precise implement control with high-sealing bidirectional check valve
  • Adjustable length from 19-11/16 to 28 inches for versatile attachment
  • Strong 4-ton push and 2.5-ton pull force for heavy tasks
  • Durable 45# steel cylinder rated for 2900 psi working pressure
  • Includes two 30.1-inch 180 Bar hydraulic hoses and fittings

Hydraulic Top Link for Category 2 Tractors

This hydraulic top link is built for Category 2 tractors and adjusts from 19-11/16 to 28 inches. It supplies 4 tons of push force and 2.5 tons of pull force for heavy-duty agricultural work such as plowing and waste handling. The cylinder uses a 2.5-inch bore and a 1.4-inch piston rod.

Sustained Load Behaviour

A bidirectional check valve locks the piston rod in position once oil pressure is removed, preventing drift under constant implement weight. The cylinder is rated for 16 MPa continuous pressure with a 20 MPa maximum, and the 180-bar hoses maintain seal integrity during long operating cycles. Leakage is minimised by the high-sealing valve structure.

Build Quality and Connections

The body is made from 45# steel with a black paint finish and weighs 25.1 lbs. Two 30.1-inch hydraulic hoses with G3/8-inch check valve ports and G1/2 fittings are included, along with articulated 3/8-inch screws and copper washers. Connection holes measure 1.0 inch diameter by 2.0 inch width for direct mounting.

Highlights

  • Precise implement control with high-sealing bidirectional check valve
  • Adjustable length from 19-11/16 to 28 inches for versatile attachment
  • Strong 4-ton push and 2.5-ton pull force for heavy tasks
  • Durable 45# steel cylinder rated for 2900 psi working pressure
  • Includes two 30.1-inch 180 Bar hydraulic hoses and fittings

Specifications

TypeOther Appliances
Width8.27

Questions about this item

How much heat or noise does the cylinder generate during continuous heavy-duty plowing?

The hydraulic cylinder itself has no motor or fan, so it produces no operational noise or measurable heat; thermal load and sound come from the tractor's hydraulic pump, not this 45# steel cylinder rated for 16 MPa continuous pressure.

Which hydraulic fittings and hoses must already be on the tractor for this top link to connect?

The unit includes two 30.1 in (765 mm) 180 bar hoses with G3/8" check-valve ports and G1/2 fittings, plus 3/8 in installation screws and copper washers, so the tractor must provide matching G3/8" and G1/2 hydraulic ports.

Will the 1.0 in (25.5 mm) connection holes and 2.0 in (51 mm) width fit the existing three-point linkage on my Cat. 2 tractor?

Yes — the cylinder is built for Cat. 2 tractors with a 1.0 in (25.5 mm) pin hole and 2.0 in (51 mm) hole width, matching standard Category 2 three-point geometry for direct installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.