We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VEVOR

VEVOR Hand Chain Hoist 1 Ton 2200 lbs 20 ft G70 Red

SKU CH-AS3S-ATKFY

A manual chain hoist lifts up to 2200 lbs to 20 ft using a G70 galvanized chain and a mechanical brake that holds the load securely

  • TypeOther Appliances
  • Width7.28
  • Lifts up to 2200 lbs with 20 ft reach
  • Mechanical brake holds loads securely without accidental drops
  • Requires only 329N effort at full capacity
  • G70 galvanized chain resists corrosion and breakage
  • Both hooks rotate 360° for flexible positioning

1 Ton Manual Chain Hoist for Heavy Lifting

This VEVOR hand chain hoist lifts up to 2200 lbs (1 ton) to a height of 20 ft using a manual chain. It is built for garage, warehouse and construction-site tasks where powered lifting is not available. The alloy-steel frame and G70 heat-treated chain resist corrosion and breakage under heavy use.

G70 Galvanized Chain and Mechanical Load Brake

The upgrade G70 galvanized chain provides the strength required for the rated 2200 lbs capacity. A mechanical load brake holds the load securely in place and allows precise control without accidental drops. The chain runs on smooth ball bearings and a deep-groove disc to prevent slippage.

20 ft Lift Height with 329 N Operating Force

At full capacity the hoist requires 329 N of hand-chain force and delivers a maximum lift of 20 ft (6 m). Hooks rotate 360° with a 0.91 in (23 mm) opening for flexible rigging. The compact disc measures 5.5 in diameter by 5.1 in thick and the unit weighs 24.9 lbs (11.3 kg).

Highlights

  • Lifts up to 2200 lbs with 20 ft reach
  • Mechanical brake holds loads securely without accidental drops
  • Requires only 329N effort at full capacity
  • G70 galvanized chain resists corrosion and breakage
  • Both hooks rotate 360° for flexible positioning

Specifications

TypeOther Appliances
Width7.28

Questions about this item

How much pulling force does the 2200 lb capacity require at full load?

The hoist needs 329N of hand force to lift the rated 2200 lbs.

What chain grade is fitted and what does that limit?

A G70 heat-treated galvanized chain is supplied, rated for the hoist's 2200 lb working load limit.

What hook opening and disc width must the mounting point accommodate?

The hooks open 0.91 in (23 mm) and the body disc is 5.5 in (140 mm) wide.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.