We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black carbon steel hairpin legs with three rods each and square mounting plates

VEVOR

VEVOR Hairpin Table Legs 18" Black Set of 4

SKU CH-162S-DH37M

Set of four carbon-steel hairpin legs, 18" tall, each rated for 220 lbs with 4.3" mounting plates and rubber feet included

  • TypeOther Appliances
  • Four legs support 880 lbs total
  • Each leg rated for 220 lbs load
  • Carbon steel construction with 4 mm mounting plates
  • 18 inch height suits desks and benches
  • Includes rubber feet and screw kit for fitting

18" Hairpin Table Legs Set of 4

This set contains four black carbon-steel hairpin legs, each 18 inches high with a 10 mm tube diameter. The 4 mm mounting plates measure 11 cm square and are designed for DIY benches, desks, dining tables or end tables. Rated at 100 kg per leg, the set supports a combined 880 lbs.

Rubber Feet and Screw Kit Included

Four rubber floor feet are supplied to protect flooring and reduce sliding. A screw kit is also provided so the mounting plates can be fixed to a tabletop without sourcing separate hardware. The accessories allow immediate assembly on wood or similar surfaces.

Suits DIY Furniture Builders

These legs suit hobbyists building low-profile benches, coffee tables or desk replacements where an 18-inch height is required. They are not suited for standing-height work surfaces, bar-height counters or projects needing adjustable levelling beyond the fixed rubber feet. Builders requiring taller or height-adjustable supports should consider other options.

Highlights

  • Four legs support 880 lbs total
  • Each leg rated for 220 lbs load
  • Carbon steel construction with 4 mm mounting plates
  • 18 inch height suits desks and benches
  • Includes rubber feet and screw kit for fitting

Specifications

TypeOther Appliances

Questions about this item

Will the black finish on the carbon steel legs need refinishing over time?

The carbon steel has a black coating; if the finish wears, you can touch it up with metal paint, but no scheduled refinishing is required.

What is the first limit reached when the legs carry a continuous heavy load?

Each leg is rated for 220 lbs, so the 880 lbs total capacity across the set of four is the structural limit under sustained weight.

Do the legs transmit vibration or heat when a desk sits on them all day?

The 10 mm steel tubes and 4 mm mounting plates are rigid, and the included rubber floor feet dampen vibration; the legs themselves generate no heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.