We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange petrol pole saw with 12-inch bar, extendable aluminium shaft 7 to 12 feet, shoulder strap attached

VEVOR

VEVOR Gas Pole Saw 25CC 12in Bar 23fl oz Tank 7-12ft Extendable

SKU CH-AJBC-MAEWY

A 25 cc two-stroke gas pole saw with a 12 in bar and 23 fl oz tank extends from 7 to 12 ft for high branches

  • TypeOther Appliances
  • Width10.83
  • Cuts branches up to 10 in thick with 12 in guide bar
  • 25 cc two-stroke engine delivers 1.2 hp at 12,000 rpm
  • Extends from 7 ft to 12 ft using two 33.7 in poles
  • 23 fl oz fuel tank and 5.28 fl oz oil reservoir for longer runs
  • Lightweight 18 lbs design with shoulder strap and anti-slip handle reduces fatigue

Gas Pole Saw 25 CC 12 Inch Bar

This cordless pole saw uses a 25 cc two-stroke gasoline engine that produces 1.2 hp and reaches 12,000 rpm for fast branch cutting. The 12 inch guide bar handles branches up to 10 inches thick. Two extension poles adjust the total length from 7 feet to 12 feet, making it suitable for property owners and landscapers who need to reach high limbs without a ladder.

Assembly Fuel Mix and Chain Tension

The unit arrives with the engine, two extension poles, oil rod, guide bar, chain, guard assembly and manual as separate pieces. Assembly requires connecting the poles and fitting the bar and chain, then tensioning the 3/8 LP 44-link chain before first use. Common issues include incorrect two-stroke fuel-oil ratio causing starting problems, an under-filled 650 ml fuel tank or 150 ml chain-oil reservoir leading to cut-outs, and a loose chain that derails during operation.

Reach and Cutting Limits

The aluminium AL6063 poles extend to 3.62 metres total length, but the fixed guide bar does not rotate, so cutting angle is limited by pole orientation. Maximum cutting diameter is 255 mm, and the 30.5 cm bar length restricts single-pass capacity on thicker wood. The 18 lb weight shifts forward when fully extended, increasing operator fatigue during prolonged overhead work. The two-stroke engine requires mixed fuel and regular air-filter maintenance, which adds ongoing effort compared with electric alternatives.

Highlights

  • Cuts branches up to 10 in thick with 12 in guide bar
  • 25 cc two-stroke engine delivers 1.2 hp at 12,000 rpm
  • Extends from 7 ft to 12 ft using two 33.7 in poles
  • 23 fl oz fuel tank and 5.28 fl oz oil reservoir for longer runs
  • Lightweight 18 lbs design with shoulder strap and anti-slip handle reduces fatigue

Specifications

TypeOther Appliances
Width10.83

Questions about this item

How do I confirm the 25 cc two-stroke engine is running correctly after assembly?

Start the engine using the enlarged pull cord; it should reach up to 12,000 RPM. Verify the 3/8 LP alloy steel chain moves smoothly on the 12 in guide bar and cuts branches up to 10 in thick without stalling.

What components are included and what must I supply separately?

The box contains the pole saw, 25 cc engine, two extension poles, oil rod, 12 in guide bar, 44-link chain, D-type guard assembly, single item and user manual. You must purchase two-stroke fuel and chain oil separately.

Which extension pole configuration gives me the 12 ft reach?

Fit both 33.7 in AL6063 extension poles to the power head for the full 12 ft (3.62 m) length; using only one pole or none yields the shorter 7 ft (2.12 m) reach.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.