We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black torsion springs with winding bars and gloves

VEVOR

VEVOR Garage Door Torsion Springs 0.25 x 2 x 32 in 16000 Cycles

SKU CH-KFK0-7M21Q

Pair of 0.25 x 2 x 32 inch torsion springs rated for 16000 cycles with winding bars, gloves and mounting wrench included

  • TypeOther Appliances
  • Width6.1
  • Heat-treated steel coils with electrocoating resist corrosion for long service life
  • Rated for 16000 open-close cycles maintaining elasticity over three years
  • Pair includes left-hand and right-hand springs pre-marked for correct installation
  • Supplied with non-slip winding bars, gloves and mounting wrench for safe fitting
  • Dimensions 0.25 x 2 x 32 in match standard garage door specifications

Specifications and Dimensions

This pair of torsion springs measures 0.25 inch wire diameter, 2 inch inner diameter and 32 inch length with 128 coils each. One spring is dextrorotary and the other levorotary, supplied with winding bars, gloves and a mounting wrench for direct replacement.

Who This Suits

Homeowners replacing worn springs on a standard residential garage door that matches the stated wire diameter and length. Installers without the exact original dimensions should verify measurements before ordering to avoid fitment issues.

Cycle Rating

Rated for approximately 16000 open-and-close cycles, the heat-treated high carbon steel coils with electrocoated finish maintain elasticity for an extended period without additional lubrication.

Highlights

  • Heat-treated steel coils with electrocoating resist corrosion for long service life
  • Rated for 16000 open-close cycles maintaining elasticity over three years
  • Pair includes left-hand and right-hand springs pre-marked for correct installation
  • Supplied with non-slip winding bars, gloves and mounting wrench for safe fitting
  • Dimensions 0.25 x 2 x 32 in match standard garage door specifications

Specifications

TypeOther Appliances
Width6.1

Questions about this item

What inner diameter and wire diameter must the garage door shaft match for these 0.25 x 2 x 32 in springs to fit?

The springs require a 2 inch inner diameter and a 0.25 inch wire diameter to mount correctly on the shaft.

How do I identify which spring goes on the left and right, and what tool prevents winding-bar slippage during installation?

Each spring is imprinted with left/right labels; use the included anti-slip winding bars to wind the coils safely.

After roughly 16,000 open-close cycles, what components typically need replacement?

The torsion springs themselves are rated for 16,000 cycles and should be replaced as a pair when they reach that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.