We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal furnace blower motor with half-inch shaft and belt drive housing

VEVOR

VEVOR Furnace Blower Motor 1/2HP 1720RPM 115V 0.5" Shaft 1.6" CW/CCW

SKU CH-SKJZ-GYRZ1

A 1/2 HP furnace blower motor running at 1720 RPM on 115 V with a 0.5 inch shaft, 1.6 inch length and reversible CW/CCW rotation for direct-drive HVAC systems

  • Width9.84
  • Delivers 1/2 HP at 1720 RPM for strong furnace airflow
  • Runs on standard 115 V 60 Hz single-phase household power
  • Reversible CW/CCW rotation simplifies wiring and speeds up installation
  • Belt-driven mechanism provides smooth, low-noise operation
  • Sturdy metal casing resists corrosion for extended service life

1/2 HP Furnace Blower Motor

The VEVOR furnace blower motor delivers 1/2 HP at 1720 RPM on a 115 V 60 Hz single-phase supply. It draws 7.1 A at full load and fits residential and light-commercial indoor furnaces, air handlers and packaged HVAC units. The 0.5 inch shaft diameter and 1.6 inch shaft length match common direct-drive replacements.

Belt-Drive Speed Constraint

The belt-driven mechanism fixes the output speed at 1720 RPM, so the motor cannot be re-pullied for higher airflow without changing the drive ratio. Single-phase 115 V operation limits the unit to circuits that can sustain 7.1 A continuous current. Reversible CW/CCW rotation allows the installer to match the original blower direction without rewiring the windings.

Metal Housing and Shaft Fit

A sturdy metal casing provides corrosion resistance and protects the windings from debris in duct environments. The 0.5 inch shaft diameter and 1.6 inch shaft length accept standard blower wheels and set-screw hubs used in North American HVAC equipment. At 18.1 lbs the motor is heavy enough to require secure mounting brackets but light enough for one-person installation.

Highlights

  • Delivers 1/2 HP at 1720 RPM for strong furnace airflow
  • Runs on standard 115 V 60 Hz single-phase household power
  • Reversible CW/CCW rotation simplifies wiring and speeds up installation
  • Belt-driven mechanism provides smooth, low-noise operation
  • Sturdy metal casing resists corrosion for extended service life

Specifications

Width9.84

Questions about this item

Which shaft size matches my furnace — the 0.5 inch diameter or the 1.6 inch length?

Both dimensions belong to the same motor; the shaft is 0.5 inch in diameter and extends 1.6 inches from the housing, so check your blower wheel bore and set-screw position against those two figures.

What does the 1720 RPM rating mean once the motor is installed in my air handler?

At full load the shaft turns at 1720 revolutions per minute on 115 V 60 Hz, delivering the rated 1/2 horsepower and drawing 7.1 amps for typical residential furnace airflow.

Is the motor wired for a specific rotation or can I reverse it on the single-phase supply?

The motor is designed for reversible CW/CCW operation on the single-phase 115 V supply, so you can set the rotation direction during installation to match your blower housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.