VEVOR
VEVOR Frost Proof Yard Hydrant 6.22FT 48" Bury Depth 3/4" NPT Lever Handle Handwheel
Frost-proof yard hydrant with 48" bury depth and bypass valve to drain residual water, preventing pipe freezing year-round
- Keeps water flowing in freezing conditions with 48 in bury depth
- Bypass valve drains residual water to prevent pipe freezing year-round
- Adjustable lever and lockable handwheel give precise flow control with less vibration
- 3/4 in NPT inlet and 3/4 in NH outlet plus two O-rings enable leak-free setup
- Cast iron, steel pipe and brass construction withstands outdoor use at 14.25 lbs
Frost-Proof Yard Hydrant for Outdoor Use
This frost-proof yard hydrant provides a reliable water supply for garden watering, car washing, farm irrigation and lawn care. Its 6.22FT overall length and 48" bury depth protect the pipe from freezing in cold weather. The unit is not recommended for drinking water applications.
Bypass Valve Drains Residual Water
An upgraded frost-proof design uses a bypass valve to drain residual water through a bottom hole, preventing water buildup and freezing inside the pipe. This ensures an uninterrupted water supply year-round without requiring power or active heating elements during normal use.
3/4" NPT Inlet and 3/4" NH Outlet
The hydrant connects via a 3/4" NPT pipe connection and includes a 3/4" NH hose coupling with two O-Rings for leak-free installation. Buyers needing a different inlet thread standard or outlet coupling size should verify compatibility before purchase.
Highlights
- Keeps water flowing in freezing conditions with 48 in bury depth
- Bypass valve drains residual water to prevent pipe freezing year-round
- Adjustable lever and lockable handwheel give precise flow control with less vibration
- 3/4 in NPT inlet and 3/4 in NH outlet plus two O-rings enable leak-free setup
- Cast iron, steel pipe and brass construction withstands outdoor use at 14.25 lbs
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 3/4" NPT inlet and what step causes leaks?
Thread the 3/4" NPT inlet into the supply line using both supplied O-Rings; the step that causes leaks is omitting the second O-Ring or not seating it fully before tightening.
Which part will need replacement after several seasons of use?
The bypass valve and the two O-Rings are the wear items; the valve seat can erode from mineral deposits and the O-Rings lose elasticity, so plan to replace them when dripping appears.
What limits flow during prolonged irrigation runs?
The 3/4" NPT inlet and 3/4" NH outlet set the maximum flow capacity; friction loss in the 1895 mm steel pipe becomes the practical limit during sustained high-volume use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



