VEVOR
VEVOR Fire Glass Cobalt Blue 20 lbs 1/2 inch 12.7 mm
20 lbs of 12.7 mm cobalt-blue tempered fire glass withstands 1112 °F / 600 °C with no smoke or ash
- TypeOther Appliances
- Width8.27
- Vibrant cobalt blue glass adds luxury ambience day and night
- Tempered quartz-sand glass withstands 1112 °F / 600 °C without cracking
- Smokeless, odourless and ash-free for a clean fire feature
- Easy maintenance — rinse with water and vinegar to restore shine
- 20 lbs of 12.7 mm pieces conceal gas pipes in fire pits
Vibrant Cobalt Blue fire glass
The VEVOR Cobalt Blue fire glass comes in a 20 lbs bag of 1/2 inch reflective crushed tempered glass. It is designed for fire pit tables and landscaping where a clean, smokeless flame effect is wanted. The intense colour shines by day and flickers warmly at night, adding a luxurious touch to indoor or outdoor settings.
Replaces ceramic logs or lava rock
Unlike traditional media, this tempered glass produces no smoke, no odour and no ash, so the fire feature stays clean. The jump is worth it when you want a modern look that hides gas pipes while delivering a brilliant, reflective flame pattern without the mess of organic materials.
Withstands sustained 1112 °F / 600 °C heat
Made from quartz sand using special tempering, the glass resists cracking or darkening during long burns. It maintains its high luster through repeated heating cycles, and a simple rinse with water and vinegar restores the clear glow after cooling.
Highlights
- Vibrant cobalt blue glass adds luxury ambience day and night
- Tempered quartz-sand glass withstands 1112 °F / 600 °C without cracking
- Smokeless, odourless and ash-free for a clean fire feature
- Easy maintenance — rinse with water and vinegar to restore shine
- 20 lbs of 12.7 mm pieces conceal gas pipes in fire pits
Specifications
| Type | Other Appliances |
|---|---|
| Width | 8.27 |
Questions about this item
How much fire glass is needed to cover a burner area that is 8.27 inches wide?
The 20 lb bag of 12.7 mm Cobalt Blue tempered glass provides enough volume to conceal gas pipes and create a reflective layer over a burner up to 8.27 inches wide.
What is the correct way to clean the glass after installation without causing thermal shock?
Rinse the tempered glass pieces with a 1:1 water and vinegar solution, then let them dry completely before lighting the fire pit to avoid cracking from trapped moisture.
When should the Cobalt Blue fire glass be replaced due to heat exposure?
The glass is rated to 1112 °F or 600 °C and will not darken or crack under normal use; replace only if pieces become physically broken or heavily soiled beyond cleaning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013219BTC
In stock