VEVOR
VEVOR EM3500-24L Hybrid Solar Inverter 3500W 24V 100A MPPT
Converts 24 V battery power to 3500 W pure sine wave AC with a built-in 100 A MPPT controller accepting 60–500 V DC input
- TypeOther Appliances
- Width14.96
- Pure sine wave output runs sensitive electronics cleanly
- 100 A MPPT controller converts up to 94 % of solar input
- Works with 24 V lead-acid, lithium or LiFePO4 banks
- 10 ms UPS switchover keeps critical loads online
- 3500 W continuous power from a 6.1 kg unit
Hybrid Solar Inverter 3500W 24V
This 2-in-1 unit combines a pure sine wave inverter with an MPPT solar charge controller for off-grid photovoltaic systems. It delivers 3500W of continuous AC power at 220/230V and suits installations using 24V lead-acid, lithium or LiFePO4 battery banks. The integrated design reduces wiring complexity for remote cabins, backup power or mobile applications.
100A MPPT Controller 60-500VDC
The built-in MPPT controller accepts a PV array voltage range of 60 to 500V DC and can charge the battery bank at up to 100A from solar or combined solar and AC sources. Conversion efficiency reaches 94 percent, and the unit handles a maximum PV input power of 4000W. AC-only charging is limited to 80A, so grid-assisted charging is slower than solar peak potential.
10ms UPS Transfer 20ms Appliance
The inverter switches to battery power in 10 milliseconds when configured in UPS mode, protecting sensitive electronics during grid outages. In standard appliance mode the transfer takes 20 milliseconds, which may reset some equipment. No-load consumption is 35W, so the system draws measurable power even when idle.
Highlights
- Pure sine wave output runs sensitive electronics cleanly
- 100 A MPPT controller converts up to 94 % of solar input
- Works with 24 V lead-acid, lithium or LiFePO4 banks
- 10 ms UPS switchover keeps critical loads online
- 3500 W continuous power from a 6.1 kg unit
Specifications
| Type | Other Appliances |
|---|---|
| Width | 14.96 |
Questions about this item
Will the 10 ms UPS response time protect my existing 24V lead-acid battery bank during grid outages?
The inverter switches to battery power in 10 ms in UPS mode, fast enough to keep most 24V lead-acid systems running without interruption.
How can I verify the MPPT controller is delivering up to 100 A from my 60–500 V DC array?
Connect the supplied WiFi antenna and monitor real-time PV voltage, charging current and battery state of charge through the companion app or the on-screen display.
Does the package include the 100 A MPPT controller and WiFi antenna, or must I buy them separately?
The MPPT controller is built into the inverter; the box contains the hybrid unit, one WiFi antenna and a user manual — no extra controller purchase is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



