We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey hoist unit with braided steel cable, alloy hook and wired remote control

VEVOR

VEVOR Electric Hoist 1320 lbs 1150W 110V 40ft Lift 14ft Remote

SKU CH-E7YJ-3989M

Lifts up to 1320 lbs at 33 ft/min with a 40 ft cable and 14 ft wired remote

  • TypeOther
  • Lifts 1320 lbs with a 1150W pure copper motor
  • 40ft single-cable lifting height for tall garage or warehouse jobs
  • 14ft wired remote keeps the operator clear of the load
  • 33 ft/min single-cable speed moves material efficiently
  • Braided 4mm steel cable with 19 strands and alloy steel hook for secure grip

VEVOR 1320 lbs Electric Hoist

This VEVOR electric hoist lifts up to 1320 lbs using a 1150 W pure copper motor on 110 V supply. A 14 ft wired remote lets the operator stay clear of the load. The 40 ft single cable height suits garage, warehouse and factory tasks. Braided steel cable and alloy steel hooks complete the package.

Upgrade from manual chain blocks

Replaces hand operated chain blocks when daily lifts exceed comfortable manual effort. The jump is worth it when cycle times matter and a 33 ft per minute single cable speed cuts labour hours. Not for buyers who need more than 1320 lbs capacity or lifts beyond 40 ft single cable height.

Mounting and wiring considerations

The unit weighs 37.04 lbs and measures 15.4 x 5.9 x 7.1 inch so plan a secure overhead anchor point. A 110 V circuit must handle 1150 W motor draw. The 14 ft remote cable limits operator distance; longer runs need careful cable routing to avoid snagging.

What usually goes wrong

Improper mounting leads to alignment stress on the braided steel cable. Overloading past 1320 lbs risks motor overheating and hook deformation. The 4 mm 19 strand cable must be inspected for fraying before each use. Remote control wiring damage is common if the cable is not protected from pinch points.

Highlights

  • Lifts 1320 lbs with a 1150W pure copper motor
  • 40ft single-cable lifting height for tall garage or warehouse jobs
  • 14ft wired remote keeps the operator clear of the load
  • 33 ft/min single-cable speed moves material efficiently
  • Braided 4mm steel cable with 19 strands and alloy steel hook for secure grip

Specifications

TypeOther

Questions about this item

What overhead clearance and beam width does the 15.4 x 5.9 x 7.1 inch hoist body need to mount?

The unit measures 15.4 inches long, 5.9 inches wide and 7.1 inches high, so allow at least that much clear space on the mounting beam plus room for the 4 mm braided steel cable to spool freely.

How do you wire the 110 V supply and where do installers commonly trip up?

Connect the hoist to a grounded 110 V circuit rated for 1150 W; the frequent mistake is using an undersized extension cord that drops voltage and stalls the pure copper motor under load.

When should the 4 mm 19-strand steel cable be replaced?

Inspect the 12 m cable before each use and replace it immediately if you see broken strands, kinks, corrosion or diameter reduction, since a damaged cable cannot safely handle the 1320 lb rated load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.