We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VEVOR

VEVOR Electric Bottle Warmer 2×0.8 L 160W 86–185°F Stainless Steel

SKU CH-ZQ5W-WJ4AR

A commercial sauce warmer with two 0.8 L water tanks and 160 W heating, adjustable from 86 to 185 °F, built in stainless steel for food service use

  • TypeOther Appliances
  • Width12.01
  • Dual 0.7 L bottles serve two sauces simultaneously
  • 86–185 °F adjustable range keeps toppings at serving temperature
  • 160 W heater brings water bath to target heat quickly
  • Stainless-steel food-contact surfaces resist rust and corrosion
  • Separate water basins and removable pump head simplify cleaning

Electric Bottle Warmer 2×0.8 L

This commercial warmer holds two 0.8 L water tanks and two 0.7 L squeeze bottles. It is built for cafés, concession stands and food trucks that need to keep cheese, caramel or hot fudge at serving temperature throughout service. The stainless-steel construction suits high-volume daily use.

Thermals and power draw

The 160 W heater brings the water bath from 30 °C to 85 °C (86–185 °F) quickly and holds the set point without overshoot. Insulated stainless walls limit heat loss so the element cycles infrequently, keeping electricity use low and the outer surfaces safe to touch during normal operation.

Adjustable 86–185 °F range

The single dial sets any temperature between 86 °F and 185 °F, letting you match the exact viscosity each topping requires. If your menu demands a fixed holding temperature above 185 °F or a precision of ±1 °F, this unit will not meet that need.

Highlights

  • Dual 0.7 L bottles serve two sauces simultaneously
  • 86–185 °F adjustable range keeps toppings at serving temperature
  • 160 W heater brings water bath to target heat quickly
  • Stainless-steel food-contact surfaces resist rust and corrosion
  • Separate water basins and removable pump head simplify cleaning

Specifications

TypeOther Appliances
Width12.01

Questions about this item

How do I install the VEVOR Electric Bottle Warmer and what step is often missed?

Place the unit on a stable surface, fill each water tank with 0.8 L of water, insert the 0.7 L squeeze bottles, plug into a 110–120 V 60 Hz outlet, then set the dial between 86–185 °F; the step often missed is pre-filling the water tanks before turning on the 160 W heater.

What maintenance or replacement will the warmer need later?

The food-grade stainless steel inner lining, pump head and inner cover resist rust, but the pump head should be detached and cleaned regularly; squeeze bottles may need replacement if the nozzle wears or cracks after repeated dispensing of cheese, fudge or caramel.

What limit appears first during sustained use?

The 160 W heating element can only maintain the set temperature while the 0.8 L water tanks have enough volume to transfer heat; once the water level drops below the element, temperature stability is lost until the tanks are refilled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.