We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metallic drive clutch with two pulleys, rubber belt and mounting plate on metal base

VEVOR

VEVOR Drive Clutch 2000 RPM 2-8 HP 3/4 in 5/8 in

SKU CH-24XM-J7R0G

Transfers power at 2000 RPM for 2-8 HP engines using 3/4 in and 5/8 in bores with included belt and hardware

  • TypeOther Appliances
  • Width9.02
  • 2000 RPM working speed powers demanding equipment
  • 2-8 HP engine compatibility suits a wide range of machines
  • 3/4 inch and 5/8 inch bore sizes fit common shafts directly
  • 6 x 6.7 x 9.1 inch footprint installs in tight spaces
  • Includes driver belt, mounting plate and hardware for immediate setup

Mechanical drive clutch for small engines

This centrifugal clutch engages at 2000 RPM and suits engines rated between 2 and 8 HP. It transmits power through a rubber belt between a 3/4 inch driver bore and a 5/8 inch driven bore. The unit weighs 12.2 lbs and measures 12.6 x 6.7 x 9.1 inches.

Included pulleys belt cover and mounting hardware

The package supplies both driver pulleys a plastic cover a mounting plate the rubber belt mounting hardware and a user manual. These parts let you install the clutch on compatible shafts without sourcing separate components. The cover helps keep debris off the belt during operation.

Engagement speed fixed at 2000 RPM

The clutch only begins to transmit torque once the engine reaches 2000 RPM so the driven equipment sees no load below that speed. Builders whose application requires engagement at a different RPM or a direct shaft coupling will need a different clutch design.

Highlights

  • 2000 RPM working speed powers demanding equipment
  • 2-8 HP engine compatibility suits a wide range of machines
  • 3/4 inch and 5/8 inch bore sizes fit common shafts directly
  • 6 x 6.7 x 9.1 inch footprint installs in tight spaces
  • Includes driver belt, mounting plate and hardware for immediate setup

Specifications

TypeOther Appliances
Width9.02

Questions about this item

How often should the rubber drive belt be inspected or replaced on the MC30K75D10T?

Inspect the belt every few months for cracks or glazing; replace it when wear reaches the cord or tension can no longer be taken up with the mounting hardware.

At the 2000 RPM work speed, which component reaches its limit first during continuous operation?

The 3/4 inch driver pulley and 5/8 inch driven pulley run at the rated 2000 RPM; sustained loads above the 2-8 HP range will overload the belt before the clutch mechanism itself.

How much heat does the clutch assembly generate when running all day under load?

The metal pulleys and rubber belt produce noticeable warmth at 2000 RPM; keep the plastic cover vents clear and ensure the mounting plate bolts stay tight so heat conducts into the frame.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.