VEVOR
VEVOR Drag Harrow 6 ft 72 in Chain Adjustable Bars Q235 Steel 21.65 in Wide
A 6 ft wide tow-behind drag harrow with adjustable bars and 72 in chain levels soil, gravel and grass behind ATVs, UTVs or tractors
- TypeOther Appliances
- Width21.65
- 6 ft working width covers large areas in one pass
- 72 in chain with adjustable bars lets you set 8×16 in or 16×16 in spacing
- Q235 steel frame with powder coating resists rust on tough terrain
- Tow-behind hitch fits ATVs, UTVs, tractors and mowers
- Quick hitch system and included hardware enable fast assembly
Farm Tow Implement
This VEVOR drag harrow is a specialty appliance built for land management behind ATVs, UTVs, tractors, or mowers. The Q235 steel frame with green powder coating resists rust while handling soil, grass, gravel, and rocks across farms, lawns, and driveways. Adjustable crossbars add weight for better leveling performance in a single pass.
Upgrade From Manual Rakes
It replaces hand-held landscape rakes and lightweight drag mats that cannot cover wide paths or apply consistent downward force. The 72 in chain and adjustable bar spacing of 16 x 16 in or 8 x 16 in let operators match the pull to ground conditions. The jump is worth it when leveling large areas repeatedly without fatigue.
Build Integration
The unit measures 72.05 in long by 19.69 in wide by 3.94 in high and weighs 53.58 lb, arriving in two half-harrow sections with a connector, chains, shackles, and pins for quick hitch assembly. It needs a tow vehicle with a compatible drawbar and enough traction to pull the loaded frame. The adjustable chain length frees the operator to set pulling angle for surface finish.
Highlights
- 6 ft working width covers large areas in one pass
- 72 in chain with adjustable bars lets you set 8×16 in or 16×16 in spacing
- Q235 steel frame with powder coating resists rust on tough terrain
- Tow-behind hitch fits ATVs, UTVs, tractors and mowers
- Quick hitch system and included hardware enable fast assembly
Specifications
| Type | Other Appliances |
|---|---|
| Width | 21.65 |
Questions about this item
What tow-vehicle hitch or drawbar height works with the 72 in chain and 3.94 in frame height?
The 72 in chain connects to ATV, UTV, tractor or mower drawbars using the included D-shaped shackles and hook pin; the frame sits 3.94 in off the ground, so set the hitch height to keep the chain taut without lifting the front tines.
Which bolts and adjustable bars must be positioned first during assembly so the 16 in and 20 in width settings lock correctly?
Bolt the two half-harrow sections together with the connector and four short screw nuts, then insert the adjustable bars into the 16 x 16 in or 8 x 16 in holes before tightening the R-pin, otherwise the bars can rotate out of alignment.
How often should the green powder-coated Q235 steel tines and 72 in chain be inspected for wear or rust?
Check the tines and chain after every 20 hours of use; the powder coating resists rust on the Q235 steel, but gravel and moisture can abrade it, so touch up any bare spots and replace stretched chain links promptly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
