VEVOR
VEVOR Double-Pipe Water Dispenser Pump System 2×5 Gallon
Automatic dual-tube pump delivers 2.5 L/min at 2.8–4.1 bar from two 5-gallon bottles, cutting change frequency
- TypeOther Appliances
- Width10.83
- Dual inlet pipes extend time between bottle changes
- 100-240V adapter works across global voltage standards
- 40-60 PSI pressure delivers strong, steady flow
- 5 L/min outlet rate fills cups and appliances fast
- Compact 225 x 140 x 70 mm footprint saves counter space
Dual five gallon pump system
The VEVOR double pipe water dispenser pump system serves two five gallon bottles simultaneously. It suits offices, kitchens or workshops that need continuous filtered water for coffee machines, refrigerators or ice makers without manual bottle swaps.
Wide voltage adapter and dual inlet pipes
A 100 to 240 volt adapter removes regional voltage concerns while two inlet pipes extend the usage cycle between bottle changes. The unit weighs 1.8 kg and measures 225 by 140 by 70 mm for compact countertop or under cabinet placement.
Upgrades single bottle gravity dispensers
Replaces gravity fed coolers that deliver inconsistent pressure and require frequent five gallon swaps. The jump is worth it when steady 40 to 60 psi output at 2.5 litres per minute matters for appliance performance and reduced staff intervention.
Highlights
- Dual inlet pipes extend time between bottle changes
- 100-240V adapter works across global voltage standards
- 40-60 PSI pressure delivers strong, steady flow
- 5 L/min outlet rate fills cups and appliances fast
- Compact 225 x 140 x 70 mm footprint saves counter space
Specifications
| Type | Other Appliances |
|---|---|
| Width | 10.83 |
Questions about this item
What pressure range does the pump maintain for connected appliances?
The pump delivers a working pressure of 40 to 60 PSI, or 2.8 to 4.1 bar, suitable for coffee machines, refrigerators and ice makers.
What are the unit's dimensions for under-counter mounting?
The pump measures 8.86 by 5.51 by 2.76 inches, or 225 by 140 by 70 millimetres, and weighs 1.8 kilograms.
How do you prime the dual-tube system during first installation?
Connect both inlet pipes to the 5-gallon bottles, plug the 100 to 240-volt adapter into mains power, and run the pump until water flows steadily from the outlet; the step often missed is letting both tubes fill completely before attaching downstream equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



