VEVOR
VEVOR Digital Hydraulic Pressure Gauge 0-10000 PSI 0-700 Bar 1/4 NPT Stainless Steel
Digital hydraulic pressure gauge measuring 0-10,000 PSI with ±0.2% accuracy, unit switching, backlight, peak hold, and stainless steel housing
- TypeOther Appliances
- Width6.1
- Measures up to 10000 PSI and 700 Bar for heavy-duty hydraulic systems
- ±0.2% accuracy sensor with smart chip for reliable real-time readings
- Switches between Bar, PSI, MPa and kgf/cm² with backlight and peak hold
- Stainless steel SUS304 housing with silicone cover resists corrosion and impact
- Includes PTFE tape and desiccants for immediate installation and moisture protection
Universal Digital Hydraulic Gauge
This digital hydraulic pressure gauge measures 0-10000 PSI and 0-700 Bar. It features a 1/4 inch NPT base entry for direct connection to hydraulic systems. The stainless steel housing and silicone cover protect the sensor in excavator and construction machinery environments.
Suited for Maintenance Technicians
Technicians needing real-time pressure readings with ±0.2% accuracy will benefit from the smart chip and unit switching between Bar, PSI, MPa and kgf/cm². Buyers requiring wireless data logging or integrated alarm outputs should look at alternative instruments.
Handles High-Pressure Testing
The gauge comfortably handles continuous hydraulic pressure testing up to the rated 10000 PSI limit. Peak hold captures transient spikes while zero calibration maintains baseline accuracy. It runs out of headroom beyond the 700 Bar maximum range.
Highlights
- Measures up to 10000 PSI and 700 Bar for heavy-duty hydraulic systems
- ±0.2% accuracy sensor with smart chip for reliable real-time readings
- Switches between Bar, PSI, MPa and kgf/cm² with backlight and peak hold
- Stainless steel SUS304 housing with silicone cover resists corrosion and impact
- Includes PTFE tape and desiccants for immediate installation and moisture protection
Specifications
| Type | Other Appliances |
|---|---|
| Width | 6.1 |
Questions about this item
What thread size must my hydraulic port have for the 1/4 NPT base entry to seal properly?
The gauge has a 1/4 inch NPT male thread; your port needs a matching 1/4 inch NPT female thread and the supplied PTFE tape for a leak-free seal.
Can I leave the gauge on a system that runs above 700 bar without damaging the sensor?
No. The measuring range stops at 700 bar (10,000 PSI); pressures above that exceed the sensor limit and can cause permanent damage.
How do I verify the ±0.2% accuracy claim after I install the gauge?
Apply a known reference pressure within the 0-700 bar range, compare the reading to the reference, and confirm the deviation is within ±0.2% of full scale; use the zero calibration function if needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
