We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR CW-6300 industrial water chiller, steel shell with PP panels, 10.6 gal tank

VEVOR

VEVOR CW-6300 Industrial Water Chiller 27,300 BTU/h 10.6 Gal

SKU CH-A24W-X066J

A 10.6 gal compressor chiller delivering 27,300 BTU/h at 18.5 GPM for CO₂ laser cooling

  • TypeOther Appliances
  • 27,300 BTU/h cooling capacity handles high-heat laser tubes
  • 6 gal tank holds more coolant for stable temperatures
  • 5 GPM max flow delivers rapid heat removal
  • Compressor-based cooling provides consistent industrial-grade performance
  • Q235 steel shell protects internal components in demanding environments

Industrial Water Chiller for Laser Systems

The VEVOR CW-6300 is a compressor-driven industrial water chiller rated at 27,300 BTU/h with a 10.6 Gal tank. It delivers up to 18.5 GPM flow to maintain stable coolant temperature for CO2 laser engraving and cutting machines. The unit operates at 80 dB and uses a 2500 W rated power input.

Suited for Continuous Laser Cooling

This chiller fits workshops running CO2 laser tubes that demand constant heat removal at 8000 W capacity. The 40 L reservoir and 70 L/min peak flow support extended cutting sessions without frequent refills. Buyers needing quieter operation below 80 dB or a smaller footprint for light-duty hobby lasers should look at alternative cooling methods.

Sustained Load Behaviour

Under continuous load the compressor maintains the rated 27,300 BTU/h cooling capacity while circulating coolant through copper tubes inside a Q235 steel shell. The 3.35 HP motor sustains the 18.5 GPM maximum flow rate during prolonged cuts, keeping laser tube temperatures stable over long production runs.

Highlights

  • 27,300 BTU/h cooling capacity handles high-heat laser tubes
  • 6 gal tank holds more coolant for stable temperatures
  • 5 GPM max flow delivers rapid heat removal
  • Compressor-based cooling provides consistent industrial-grade performance
  • Q235 steel shell protects internal components in demanding environments

Specifications

TypeOther Appliances

Questions about this item

What power supply do I need to run the CW-6300 chiller?

The unit draws 2500 W (3.35 HP) at its rated power, so a circuit capable of supplying that load is required.

Can I keep my existing 18.5 GPM pump and still get full flow through this chiller?

Yes, the chiller's maximum water flow is rated at 18.5 GPM (70 L/min), matching that pump's output.

How can I verify the chiller is delivering its 27,300 BTU/h rating after installation?

Measure the inlet and outlet water temperatures under load; the difference multiplied by the flow rate should equal roughly 8000 W of heat removal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.