VEVOR
VEVOR CW-6200 Industrial Water Chiller 17060 BTU/h 3.96 Gal 18.5 GPM
Industrial water chiller delivers 17,060 BTU/h cooling via compressor for CO2 laser tubes with a 3.96-gallon tank and 18.5 GPM flow
- TypeOther Appliances
- 17,060 BTU/h cooling capacity handles demanding laser workloads
- 96 gal tank provides ample coolant reserve for extended runs
- 5 GPM maximum flow ensures rapid heat removal from laser tubes
- Compressor-based cooling delivers consistent temperature control during operation
- Q235 steel shell with copper tubes offers durable construction for industrial use
VEVOR CW-6200 Industrial Chiller
The VEVOR CW-6200 is a compressor-based industrial water chiller rated at 17,060 BTU/h for cooling CO2 laser tube engraving and cutting machines. It holds a 3.96 Gal water tank and delivers up to 18.5 GPM maximum flow to maintain stable temperatures during operation. This unit suits workshops needing dedicated liquid cooling for high-heat laser applications.
Cooling limits at 5000 W capacity
The chiller provides a rated cooling capacity of 5000 W using a compressor cooling method while drawing 1750 W of rated power. Operating noise reaches 80 dB, which sets a practical limit for quiet environments. The 70 L/min maximum flow rate defines the upper bound for heat removal in continuous laser cutting cycles.
Steel shell with copper tube construction
The main material combines a Q235 steel shell with PP components and copper tubes for corrosion resistance and thermal transfer. The 15 L tank capacity supports extended runs without frequent refills. Standard inlet and outlet ports allow direct plumbing to laser equipment for daily production use.
Highlights
- 17,060 BTU/h cooling capacity handles demanding laser workloads
- 96 gal tank provides ample coolant reserve for extended runs
- 5 GPM maximum flow ensures rapid heat removal from laser tubes
- Compressor-based cooling delivers consistent temperature control during operation
- Q235 steel shell with copper tubes offers durable construction for industrial use
Specifications
| Type | Other Appliances |
|---|
Questions about this item
Which model suits a CO₂ laser engraver needing around 17 000 BTU/h?
The CW‑6200 delivers 17 060 BTU/h (5000 W) cooling capacity, a 3.96 gal tank and 18.5 GPM maximum flow, matching that requirement.
What does the 17 060 BTU/h rating mean when the chiller is running?
It means the unit can remove up to 17 060 BTU/h of heat from the coolant loop, keeping the laser tube at stable temperature during continuous operation.
What flow rate does the pump provide and what does that limit?
The pump reaches 18.5 GPM (70 L/min), so the cooling loop can circulate up to that volume per minute, setting the practical flow ceiling for connected equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
