We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular industrial water chiller unit with metal shell and visible inlet outlets

VEVOR

VEVOR CW-5200DG Industrial Water Chiller 5460 BTU/h 1.8 Gal 3.4 GPM

SKU CH-N3QH-STH55

Cools CO₂ laser engravers and cutters with a 5460 BTU/h compressor, 1.8 gal tank and 3.4 GPM flow at 80 dB

  • TypeOther Appliances
  • 5460 BTU/h cooling capacity handles heavy laser loads
  • 8 gal tank reduces refill frequency during long runs
  • 4 GPM maximum flow keeps coolant moving steadily
  • 650 W rated power runs on standard workshop supply
  • 80 dB operating noise suits industrial environments

Compact chiller for laser engravers

The VEVOR CW-5200DG is a compressor-driven water chiller rated at 5460 BTU/h (1600 W) cooling capacity. It targets operators of CO2 laser engraving and cutting machines who need stable coolant temperature during long jobs. The 1.8 gal tank and 3.4 GPM maximum flow suit small-to-medium laser tubes in workshop or light-industrial settings.

Simple plumbing and power connection

Installation requires connecting inlet and outlet hoses to the laser system, filling the tank with clean water, and plugging the unit into a suitable mains supply. The Q235 steel shell with copper tubes resists corrosion, but the 80 dB operating noise means the chiller should be placed away from quiet workstations. Users sometimes forget to prime the pump or leave air in the loop, which reduces flow until bled.

Steady temperature under continuous load

The compressor cycle maintains coolant temperature across extended cutting sessions rather than short bursts. Rated power of 0.87 HP (650 W) supports sustained heat removal up to the 1600 W rating. The 13 L/min peak flow keeps temperature differentials small across the laser tube, preventing thermal drift that degrades cut quality over hours of operation.

Highlights

  • 5460 BTU/h cooling capacity handles heavy laser loads
  • 8 gal tank reduces refill frequency during long runs
  • 4 GPM maximum flow keeps coolant moving steadily
  • 650 W rated power runs on standard workshop supply
  • 80 dB operating noise suits industrial environments

Specifications

TypeOther Appliances

Questions about this item

How can I confirm the CW-5200DG is cooling correctly after installation?

Check that the compressor runs and the water temperature stabilises at the set point while the flow meter reads up to 3.4 GPM during laser operation.

What comes with the chiller and what must I source separately?

The box contains the chiller unit only; you will need to supply inlet and outlet hoses, hose clamps, coolant and a suitable power cord for the 650 W draw.

Which capacity version of the CW-5200DG should I choose for my CO2 laser?

This model provides 5460 BTU/h cooling with a 1.8 gal tank and 3.4 GPM maximum flow; match those figures to your laser manufacturer's heat-load and flow requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.