VEVOR
VEVOR Condenser Fan Motor 5KCP39BGS069S 1/10 HP 208-230V 1100RPM Specialty Appliance
A 1/10 HP condenser fan motor runs at 1100 RPM on 208-230V, includes an explosion-proof 5 µF/370V capacitor, reversible rotation and overheat protection
- TypeOther
- Reliable cooling from 1/10 HP motor running at 1100 RPM
- Safe operation with explosion-proof CBB65 5F/370V capacitor
- Flexible installation via reversible rotation direction
- Easy wiring using extended cable length
- Continuous duty protected by built-in overheat protection
Condenser Fan Motor 1/10 HP 208-230V
This VEVOR condenser fan motor delivers 1/10 HP at 1100 RPM for HVAC condenser units. It operates on 208-230V single-phase power at 60 Hz and includes an explosion-proof CBB65 5 µF/370V capacitor. The reversible rotation design suits both clockwise and counter-clockwise applications.
Sustained Load Behaviour 75W 0.75A
Continuous operation draws 75 W and 0.75 A with built-in overheat protection to guard against thermal overload. The low-noise design reduces audible output during extended run cycles. Extended cables simplify wiring inside tight service compartments without adding resistance.
Installation Checks Shaft 0.5 Inch Stud 5.2 Inch
Verify the existing motor shaft diameter matches 0.5 in (12.7 mm) and the mounting stud pattern measures 5.2 in x 5.2 in (132 mm x 132 mm). Confirm the supply voltage falls within 208-230V and the system frequency is 60 Hz. Ensure the capacitor rating aligns with the supplied 5 µF/370V component.
Highlights
- Reliable cooling from 1/10 HP motor running at 1100 RPM
- Safe operation with explosion-proof CBB65 5F/370V capacitor
- Flexible installation via reversible rotation direction
- Easy wiring using extended cable length
- Continuous duty protected by built-in overheat protection
Specifications
| Type | Other |
|---|
Questions about this item
How much noise and heat does the 1/10 HP motor produce when running continuously at 1100 RPM?
The motor features a low-noise design and built-in overheat protection for safe, quiet operation during extended use.
What capacitor and voltage supply are required to install the 5KCP39BGS069S condenser fan motor?
It requires an explosion-proof CBB65 5 µF / 370 V capacitor and a 208-230 V, 60 Hz single-phase power supply.
Will the 0.5-inch shaft and 5.2-inch stud pattern fit the mounting brackets on my existing condenser unit?
The motor has a 12.7 mm shaft diameter and a 132 mm x 132 mm stud pattern; verify your unit matches these dimensions before installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



