VEVOR
VEVOR Condenser Fan Motor 1/5 HP 208-230V 825RPM 7.5F Capacitor
Reversible 1/5 HP condenser motor with 825 RPM speed, 208-230V operation, and included 7.5F capacitor
- TypeOther Appliances
- Width8.27
- 1/5 HP motor restores cooling performance
- 825 RPM speed matches original equipment specs
- 208-230V operation suits standard HVAC systems
- Reversible CW/CCW rotation fits multiple installations
- Includes 7.5F explosion-proof capacitor for immediate use
Direct Replacement Motor
This 1/5 HP condenser fan motor replaces models 5KCP39GFS166S and 3S003 in compatible air-conditioning units. It runs at 825 RPM on 208-230 V single-phase power at 60 Hz. The 150 W output suits residential and light-commercial cooling systems. Buyers needing a different horsepower or voltage rating should verify their unit's nameplate before ordering.
Reversible Design With Capacitor
A supplied CBB65 7.5 F 370 V explosion-proof capacitor enables clockwise or counter-clockwise rotation for flexible mounting. The half-inch by 2.0 inch shaft and 4.4 inch case length fit standard fan blades. Stud holes on a 5.2 inch by 5.2 inch pattern align with common bracket spacing. The motor weighs 12.79 lbs for solid mechanical stability.
Verify Fit Before Purchase
Confirm your existing motor uses a 0.5 inch shaft, 5.2 inch stud centres and 208-230 V supply. Check that the 825 RPM speed matches the original specification. Ensure the enclosure has clearance for the 4.4 inch case length and 8.27 inch overall width. Capacitor wiring must follow the supplied diagram for safe operation.
Highlights
- 1/5 HP motor restores cooling performance
- 825 RPM speed matches original equipment specs
- 208-230V operation suits standard HVAC systems
- Reversible CW/CCW rotation fits multiple installations
- Includes 7.5F explosion-proof capacitor for immediate use
Specifications
| Type | Other Appliances |
|---|---|
| Width | 8.27 |
Questions about this item
What voltage range does the 208-230V motor operate on and what current does it draw?
It runs on 208-230V single-phase power at 60Hz and draws 0.95A while delivering 1/5 HP at 825 RPM.
What are the shaft diameter and stud pattern dimensions for mounting?
The shaft measures 0.5 inches (12.7 mm) in diameter by 2.0 inches long, and the mounting studs sit on a 5.2 by 5.2 inch (132 by 132 mm) pattern.
How do I wire the reversible motor and the included capacitor correctly?
Connect the two supplied CBB65 7.5F/370V capacitors as shown on the motor label, then swap the two rotation leads to change between clockwise and counter-clockwise operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



