VEVOR
VEVOR CKX300PRO-A19 Commercial Soft Ice Cream Machine 3 Flavors 2200W Sliver
Produces 21 to 31 litres of soft ice cream per hour with three flavours, 14-minute initial freeze and 66 dB operation
- Produces 21 to 31 litres of ice cream per hour for high-volume service
- Initial freeze in 14 minutes then 4-minute cycles keep output continuous
- Two 4.3-litre stainless steel hoppers feed three distinct flavours simultaneously
- LED panel controls hardness, cleaning timer and auto-cooling with live readout
- Runs at 66 dB within 5 to 38 °C ambient range
Commercial Soft Serve for High-Volume Venues
The VEVOR CKX300PRO-A19 is a floor-standing commercial soft ice cream machine built for restaurants, snack bars and catering operations. It produces three distinct flavours from twin 4.3L hoppers and a 1.7L freezing cylinder. The 2200W system runs on standard power and operates in ambient temperatures from 5 to 38°C.
Steps Up from Countertop Batch Freezers
Unlike small batch units that require long waits between cycles, this machine delivers an initial freeze in 14 minutes and subsequent servings in 4 minutes or less. Independent pre-cooling compressors keep the mix chilled overnight, so production can start immediately at opening. The jump is worth it when peak demand exceeds what a single-flavour, manual machine can sustain.
Output Range and Practical Limits
Continuous output spans 21L to 31L per hour, roughly 5.3 to 7.4 gallons, enough for 6 to 8 cups of 80g each without interruption. Noise sits at 66 dB during operation. The stainless-steel 304 hoppers and 401 body resist corrosion, but the 111.5 kg weight and fixed footprint mean it suits permanent installations, not mobile carts or tight countertops.
Highlights
- Produces 21 to 31 litres of ice cream per hour for high-volume service
- Initial freeze in 14 minutes then 4-minute cycles keep output continuous
- Two 4.3-litre stainless steel hoppers feed three distinct flavours simultaneously
- LED panel controls hardness, cleaning timer and auto-cooling with live readout
- Runs at 66 dB within 5 to 38 °C ambient range
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the CKX300PRO-A19 need for its compressor and two pre-cooling mini compressors to exhaust heat?
The machine measures 111.5 kg net weight with stainless-steel 401 construction; allow open space on the sides and rear so the main compressor and two pre-cooling mini compressors can exhaust heat, and keep ambient temperature between 5 and 38 °C.
What step is often missed when assembling the dispensing valves after cleaning?
Re-fit the anti-leak valve stem seal ring, the four valve stem seal rings, the two mixer seal sleeves, the two liquid outlet valve support sleeves and the two liquid outlet valve seal rings exactly as supplied; lubricant is included for the seals.
Which wearable parts will need periodic replacement on this soft-serve unit?
The kit includes an anti-leak valve stem seal ring, four valve stem seal rings, two mixer seal sleeves, two liquid outlet valve support sleeves and two liquid outlet valve seal rings — these seals and sleeves wear with daily use and should be inspected regularly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



