VEVOR
VEVOR Chamber Vacuum Sealer DZ-260C-V1 320W 12.6 in Seal
Chamber vacuum sealer reaches -100 kPa vacuum with a 12.6 in, 10 mm wide seal bar and 320 W heater for leak-proof bags
- TypeOther Appliances
- Blocks oxidation and slows spoilage with -100 kPa vacuum power
- Strong 10 mm wide seal from 320 W heater resists freezer swelling
- Deep 2.8 in chamber fits large steaks and whole loaves
- Stainless steel 201 chamber and 180 W pump built for heavy use
- 6 in seal length handles both small and bulk bags
Purpose & User
The VEVOR DZ-260C-V1 is a chamber vacuum sealer built for home cooks and small commercial kitchens that need reliable air removal for wet foods, meats and marinades. Its 12.6 in seal bar and deep 14 x 13.4 x 2.8 in chamber accept large cuts or bulk bags in a single cycle.
Upgrade Path
It replaces external suction sealers that struggle with liquids and limit bag size. The jump is worth it when you regularly seal soups, marinated cuts or high-volume batches and need the -100KPa vacuum level that a 180W pump delivers inside a rigid stainless steel 201 chamber.
Build Integration
The unit measures 17.9 x 16.1 x 16 in and weighs 60.8 lbs, so it needs a sturdy, level countertop near a 120V 60Hz outlet rated for 1700W peak draw. A 70dB operating noise level suits a prep area away from quiet zones. The included filling plate lets you adjust chamber height for smaller bags, freeing you from buying multiple bag sizes.
Highlights
- Blocks oxidation and slows spoilage with -100 kPa vacuum power
- Strong 10 mm wide seal from 320 W heater resists freezer swelling
- Deep 2.8 in chamber fits large steaks and whole loaves
- Stainless steel 201 chamber and 180 W pump built for heavy use
- 6 in seal length handles both small and bulk bags
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What countertop space does the 17.9 x 16.1 x 16 in footprint and 60.8 lb weight require?
The unit measures 17.9 x 16.1 x 16 inches and weighs 60.8 lbs, so allow a sturdy, level surface at least that large with clearance for the lid to open fully.
Which step is often missed when wiring the AC 120V, 60Hz power cord and priming the pump with the supplied oil?
Fill the vacuum pump with the included oil before the first power-on, then plug the cord into a grounded 120V outlet; skipping the oil fill can damage the 180W pump.
When should the 10 mm heating wire, high-temperature tape and chamber sealing ring be replaced?
Replace the heating wire and tape when seals become inconsistent, and swap the sealing ring if vacuum drops below -100KPa or the lid leaks during a cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



