We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop router table with 24 by 15.7 inch MDF top and metal base

VEVOR

VEVOR Benchtop Router Table 24 x 15.7 in MDF Top Metal Base 2.5 in Dust Port

SKU CH-0QXB-R7TYK

Compact benchtop router table with 610 x 400 mm MDF top, adjustable fence, and 63 mm dust port for precise woodworking

  • TypeOther Appliances
  • Width22.24
  • Solid, vibration-free routing from a 24 x 15.7 in MDF top on a steel base
  • Precise, repeatable cuts via a 12.01 x 6.02 in fence that slides in every direction
  • Cleaner air and bench with a 2.5 in dust port plus a clear debris guard
  • One table runs routers up to 11.2 x 8.11 in with assorted bits
  • Ready to use at 26.24 lbs with all accessories included

Compact Benchtop Router Table

This benchtop router table measures 24 x 15.7 in and provides a flat MDF top on a sturdy metal base for routing tasks. It suits hobbyists and small workshops that need a dedicated surface without a full-size cabinet. The 2.5 in dust port connects to a shop vac to capture debris during operation.

Upgrade From Handheld Routing

The table replaces freehand routing with a fixed surface and an adjustable fence sized 12.01 x 6.02 in for repeatable cuts. The jump is worth it when you need consistent edge profiles, dovetailing or shaping across multiple workpieces. Builders who need a larger insert plate or a heavier cast-iron top should look elsewhere.

Simple Assembly And Alignment

The unit arrives with the table, fence, guard and insert plate; mounting a compatible router under the 12.05 x 9.02 in opening takes only a few bolts. The most common issue is aligning the fence perfectly parallel to the bit, so check with a straight edge before locking it down. The transparent guard must be positioned low enough to block chips without fouling the workpiece.

Highlights

  • Solid, vibration-free routing from a 24 x 15.7 in MDF top on a steel base
  • Precise, repeatable cuts via a 12.01 x 6.02 in fence that slides in every direction
  • Cleaner air and bench with a 2.5 in dust port plus a clear debris guard
  • One table runs routers up to 11.2 x 8.11 in with assorted bits
  • Ready to use at 26.24 lbs with all accessories included

Specifications

TypeOther Appliances
Width22.24

Questions about this item

What are the exact tabletop dimensions and weight so I can confirm it fits my bench?

The MDF top measures 24 x 15.7 x 1 in and the complete unit weighs 26.24 lbs.

How do I mount a router to the 12.05 x 9.02 in insert plate, and what alignment step is often missed?

Bolt the router to the insert from below, then centre the bit in the opening before tightening the fence to avoid offset cuts.

Which dust-hose size fits the 2.5 in port and when should the MDF top be replaced?

Use a 2-1/2 in hose on the 63 mm port; replace the MDF if it swells, warps, or the surface becomes too rough for smooth workpiece feed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.