We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green compact hat heat press with two curved platens and touchscreen control panel

VEVOR

VEVOR Auto Hat Heat Press Machine F138 Green 350W 12.4 in

SKU CH-B0NP-NQX8C

Automatic hat heat press with two interchangeable platens, touchscreen control up to 401 °F, and 110 lbs force for hands-free cap customisation

  • TypeOther Appliances
  • Width12.4
  • One-touch auto press applies up to 110 lbs force freeing hands for efficient DIY creation
  • Two interchangeable platens 6 x 3.2 in and 6.5 x 3.6 in fit baseball caps and bucket hats
  • Touchscreen sets temperature 104 to 401 °F and time up to 1999 s for precise control
  • ADC12 alloy heating plate gives fast even heat with auto shut-off and 30 min inactivity power-down
  • Compact 9.45 x 8.66 x 15.5 in design weighs 9.92 lbs for easy portability

Automatic Hat Heat Press

The VEVOR F138 is a compact, 350 W heat press designed for customising caps and hats. It targets hobbyists and small-business users who want repeatable transfers without manual lever operation. The green enclosure measures 9.45 x 8.66 x 15.5 inches and weighs 9.92 lbs, so it fits on a standard workbench. Buyers needing to press flat garments, large panels or items wider than the supplied platens should look elsewhere.

Installation and Common Issues

Place the unit on a stable, heat-resistant surface, plug the supplied power cord into a grounded outlet, and select the desired platen from the two included sizes. The touchscreen sets temperature from 104 to 401 °F and time up to 1999 seconds; a single press starts the automatic cycle. The most frequent problem is choosing the wrong platen for the hat crown, which leaves unpressed edges. The machine auto-shuts off after 30 minutes of inactivity to prevent overheating.

Deciding Specification

The critical figure is the dual platen set measuring 6 x 3.2 inches and 6.5 x 3.6 inches, which defines the maximum printable area on curved headwear. If your designs exceed those dimensions or you need a flat platen for shirts, this model will not suit the job.

Highlights

  • One-touch auto press applies up to 110 lbs force freeing hands for efficient DIY creation
  • Two interchangeable platens 6 x 3.2 in and 6.5 x 3.6 in fit baseball caps and bucket hats
  • Touchscreen sets temperature 104 to 401 °F and time up to 1999 s for precise control
  • ADC12 alloy heating plate gives fast even heat with auto shut-off and 30 min inactivity power-down
  • Compact 9.45 x 8.66 x 15.5 in design weighs 9.92 lbs for easy portability

Specifications

TypeOther Appliances
Width12.4

Questions about this item

How can I confirm the machine is pressing correctly after setup?

The touchscreen shows real-time temperature up to 401 °F and counts down the timer to 1999 seconds; the platen auto-opens when the cycle finishes, confirming the 110 lbs force was applied.

What comes in the box and what must I buy separately?

Included are two interchangeable cap platens (6 x 3.2 in and 6.5 x 3.6 in), a power cord and a user manual; heat-transfer vinyl, hats and design software are not included.

Which platen size should I choose for my caps?

Use the 6 x 3.2 in platen for standard baseball caps and the 6.5 x 3.6 in platen for larger bucket hats; both are supplied so you can swap in seconds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.