We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue air hydraulic bottle jack, cylindrical cast iron body, 10.4 by 7.7 by 10 inches, with pump and handle rods

VEVOR

VEVOR Air Hydraulic Bottle Jack 32 Ton 10-16.3 Inch Blue

SKU CH-CD5P-F7DCV

A 32-ton air-hydraulic bottle jack with a 10 to 16.3-inch lifting range and pneumatic or manual operation

  • Width9.06
  • TypeFloor Jacks
  • Vehicle TypeAutomotive
  • Lifts up to 32 tons with 70546.9 lbs rated capacity
  • Adjustable lifting range from 10.0 to 16.3 inches for versatile use
  • Operates on 0.9 to 1.2 MPa air pressure for pneumatic or manual operation
  • Built from cast iron and carbon steel for heavy-duty durability
  • Compact 10.4 x 7.7 x 10.0 inch footprint fits tight workspaces

32-Ton Air Hydraulic Bottle Jack

The VEVOR air hydraulic bottle jack delivers a 32-ton rated load (70546.9 lbs) for lifting cars, SUVs, pickups, trucks and RVs. It operates on pneumatic power at 0.9–1.2 MPa working air pressure with a manual backup option. The welded construction uses cast iron and carbon steel for heavy-duty shop or field use.

Replaces manual-only bottle jacks

Switching from a hand-pump jack is worth it when you need faster, less fatiguing lifts on vehicles within the 32-ton capacity. The pneumatic operation speeds up repetitive tasks in auto repair, while the manual mode covers situations without an air supply. The 10.0–16.3 in lifting range suits standard frame heights on the listed vehicle types.

Check air supply and clearance

Verify your compressor can sustain 0.9–1.2 MPa working air pressure for pneumatic use. Confirm the 10.4 x 7.7 x 10.0 in footprint and 10.0 in collapsed height fit under the vehicle lift points. The unit weighs 42.6 lbs (19.3 kg), so ensure you can manoeuvre it into position. Two handle rods and a user manual are included.

Highlights

  • Lifts up to 32 tons with 70546.9 lbs rated capacity
  • Adjustable lifting range from 10.0 to 16.3 inches for versatile use
  • Operates on 0.9 to 1.2 MPa air pressure for pneumatic or manual operation
  • Built from cast iron and carbon steel for heavy-duty durability
  • Compact 10.4 x 7.7 x 10.0 inch footprint fits tight workspaces

Specifications

Width9.06
TypeFloor Jacks
Vehicle TypeAutomotive

Questions about this item

How much floor space does the 10.4 x 7.7 in base of this 32 ton jack need?

The jack base measures 10.4 by 7.7 inches, so allow at least that much clear, level floor area plus room for the air hose and handle rods during use.

What air pressure must the shop compressor deliver to operate the pneumatic pump on this MR8006-1 bottle jack?

Connect a regulated air line set between .9 and 1.2 MPa; the common mistake is feeding unregulated line pressure, which can exceed the limit and damage the internal pump seals.

Which parts of this 42.6 lb hydraulic bottle jack will need periodic inspection or replacement?

Check the hydraulic fluid level and condition annually, inspect the two handle rods for bending, and replace the ram seals if the 10.0-16.3 in lift range begins to drift under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.