We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large boxy industrial chiller unit in grey metal finish with control panel and visible fan grille

VEVOR

VEVOR Air-Cooled Water Chiller 6HP 53L commercial kitchen appliance

SKU CH-9S44-4WAXJ

Cools water from 5 to 25 °C with an 18 kW air-cooled system, built-in 53 L stainless-steel tank and micro-computer control

  • TypeOther Appliances
  • 6HP compressor delivers 18kW cooling for demanding industrial use
  • 53L stainless tank reduces refills and resists corrosion
  • Micro-computer LCD gives precise 5–25°C regulation
  • Air-cooled finned condenser needs no external water supply
  • Overload, pressure and alarm safeguards protect continuous operation

6HP Air-Cooled Chiller for Industrial Cooling

This 6HP air-cooled water chiller delivers 18KW cooling capacity for industrial processes and commercial kitchen equipment. A 53L stainless steel water tank reduces refill frequency while the Panasonic compressor provides stable operation at 4.5 m3/h flow rate. The unit operates on 220V three-phase power at 60Hz.

Replaces Smaller Chillers for High-Heat Loads

Upgrade from lower-capacity cooling when your engraving machines or process equipment generate heat loads approaching 15480 Kcal/h. The jump is worth it when temperature regulation between 5 and 25 degrees must be maintained under continuous operation. Built-in overload protection and high/low pressure switches protect the compressor during peak demand.

Verify Three-Phase Power and Space Before Ordering

Confirm your facility provides 220V three-phase 60Hz supply and can accommodate the 110 x 55 x 130 cm footprint. The 210 kg net weight requires suitable floor support and handling equipment. Maximum ambient temperature must not exceed 40 degrees for reliable operation. DN25 pipe connections must match your existing plumbing.

Highlights

  • 6HP compressor delivers 18kW cooling for demanding industrial use
  • 53L stainless tank reduces refills and resists corrosion
  • Micro-computer LCD gives precise 5–25°C regulation
  • Air-cooled finned condenser needs no external water supply
  • Overload, pressure and alarm safeguards protect continuous operation

Specifications

TypeOther Appliances

Questions about this item

What floor space and clearance does the 110 cm by 55 cm footprint need for the air-cooled condenser?

Allow at least the 110 cm length, 55 cm width and 130 cm height plus extra clearance around the finned condenser so ambient air stays at or below 40 °C.

Which electrical supply and pipe connections must be ready before the micro-computer control panel is powered?

Provide 220 V three-phase 60 Hz power, connect DN25 mm water pipes to the pump, then press the compressor and condenser power buttons on the LCD panel.

How often should the 53 L stainless steel tank be checked and the R407 refrigerant inspected?

Check tank level weekly; the enclosed 53 L tank reduces evaporation. Inspect R407 charge and clean the copper heat-exchange tubes annually or if cooling drops below 18 kW.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.