VEVOR
VEVOR Acoustic Panels 4 pcs 23.6 x 11.8 in 2 in Black
Four 23.6 × 11.8 inch fiberglass panels absorb mid-to-high frequencies with a 0.95 NRC rating and install tool-free using 3M self-adhesive backing
- TypeOther Appliances
- Width13.39
- Absorbs mid-to-high frequencies with an NRC of 0.95
- Self-adhesive 3M backing installs without tools
- 100% white fiberglass liner meets green E0 standards
- Each panel measures 23.6 x 11.8 x 1.97 inches
- Four panels weigh 4.36 kg total
Four-Piece Acoustic Panel Set
This set contains four black fiberglass panels measuring 23.6 by 11.8 inches and 1.97 inches thick. They are intended for rooms where mid-to-high frequency echo needs to be reduced, such as home studios, offices, meeting rooms or home theatres. The panels arrive ready to mount without tools. They are not suited for spaces that require low-frequency bass trapping or structural sound isolation.
NRC 0.95 Absorption Performance
Each panel uses a 100 percent white fiberglass liner to achieve a noise reduction coefficient of 0.95. The dense core absorbs reflected sound energy rather than reflecting it back into the room. Because the material is porous and lightweight at 4.36 kilograms per set, it adds minimal load to walls or ceilings. No power, cooling or active components are involved.
3M Self-Adhesive Backing
A factory-applied 3M adhesive layer covers the back of every panel, allowing direct press-on installation on clean, flat surfaces. No separate glue, tape or mechanical fasteners are supplied or required. The adhesive is designed to hold the 300-millimetre-wide panels securely over time. The package includes only the four panels; no templates, level or cutting tools are provided.
Highlights
- Absorbs mid-to-high frequencies with an NRC of 0.95
- Self-adhesive 3M backing installs without tools
- 100% white fiberglass liner meets green E0 standards
- Each panel measures 23.6 x 11.8 x 1.97 inches
- Four panels weigh 4.36 kg total
Specifications
| Type | Other Appliances |
|---|---|
| Width | 13.39 |
Questions about this item
How do I install the 23.6 x 11.8 inch panels with the 3M self-adhesive backing?
Clean the wall surface thoroughly, peel the protective liner from the 3M adhesive, align each 600 x 300 mm panel, then press firmly across the full 1.97 inch thickness to ensure full contact — the step most often skipped is proper surface preparation before application.
Will the 100% white fiberglass liner need replacement or special cleaning over time?
The fiberglass core is permanent and requires no replacement; surface dust can be removed with a vacuum brush attachment, but avoid moisture or chemical cleaners that could degrade the 3M adhesive bond.
At what sound level does the NRC 0.95 rating stop controlling echo effectively?
The 0.95 NRC covers mid-to-high frequencies; very low-frequency bass below the panel's 50 mm thickness will pass through, so sustained loud bass is the first limit you will notice.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
