We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Heavy ductile-iron bench vise with 8 inch jaws, 360-degree swivel base and magnetic jaw pads

VEVOR

VEVOR 9528 Bench Vise 8" Jaw 8"/11.5" Opening 3.7" Throat 360° Swivel

SKU CH-9WWG-STBN9

Heavy-duty ductile-iron bench vise with 8-inch jaws, 11.5-inch reverse opening, 3.7-inch throat depth and 360-degree swivel base

  • TypeOther Appliances
  • Width9.06
  • 6744 lbs clamping force from ductile iron construction
  • 360° swivel base positions workpiece at any angle
  • Two-way jaws open to 8" forward or 11.5" reverse
  • 7" throat depth reaches deep into large parts
  • 59–2.36" pipe jaws grip round stock securely

8-inch bench vise with 360° swivel base

This heavy-duty bench vise uses a ductile cast iron body to deliver 6744 lbs of clamping force. The 8-inch jaw width and 360-degree locking swivel base let a metalworker or fabricator position large workpieces from any angle. Two-way jaws provide both forward and reverse clamping for extra versatility. Magnetic jaw pads with pipe-jaw function are included in the package.

Mechanical limits of the jaw and throat

Forward jaw opening reaches 8 inches while reverse opening extends to 11.5 inches, so very wide stock must be clamped in reverse orientation. Throat depth is fixed at 3.7 inches, limiting how far a tall workpiece can sit from the jaw face. Pipe-jaw capacity ranges from 0.59 to 2.36 inches, so pipes outside that diameter cannot be held securely. The four-bolt mounting pattern requires a bench thick enough for M10 hardware.

6744 lbs clamping force decides suitability

The 29.96 kN rating determines whether the vise can hold your heaviest milling, welding or assembly jobs without slipping. If your work demands higher force you will need a larger vise; if the force is adequate the 44.24 lb weight and 17.91 x 8.07 x 8.66 inch footprint will fit most standard benches.

Highlights

  • 6744 lbs clamping force from ductile iron construction
  • 360° swivel base positions workpiece at any angle
  • Two-way jaws open to 8" forward or 11.5" reverse
  • 7" throat depth reaches deep into large parts
  • 59–2.36" pipe jaws grip round stock securely

Specifications

TypeOther Appliances
Width9.06

Questions about this item

Should I use the forward or reverse jaws for a piece wider than 8 inches?

Use the reverse jaws; they open to 11.5 inches while the forward jaws stop at 8 inches.

What does the 6744 lbs clamping force mean when I am tightening a workpiece?

It is the maximum force the ductile iron frame can apply; actual force depends on how hard you turn the handle.

How does the 360 degree swivel base affect the way I position the vise?

The base rotates a full circle and locks at any angle so you can face the jaws toward the job without moving the bench.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.