We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided 6AN fuel hose coiled with assorted silver swivel fittings and separators

VEVOR

VEVOR 6AN 20 ft Fuel Line Kit, .34 in ID, 12 Swivel Fittings, Black

SKU CH-HBVZ-EWC2Q

20 ft of 6AN braided fuel line with 12 swivel fittings handles gasoline, diesel and transmission fluid at up to 500 psi and -40 °F to 257 °F

  • TypeOther Appliances
  • Width9.06
  • Versatile fuel system compatibility for turbine, transmission and cooler lines
  • Three-layer nylon, stainless braid and CPE rubber construction handles 500 psi working pressure
  • 2000 psi burst rating and -40 °F to 257 °F range ensure extreme-condition reliability
  • Twelve swivel fittings in straight, 45°, 90° and 180° angles simplify custom routing
  • Twenty-foot length with .34 in inner diameter supplies ample reach for most installations

Automotive Fuel Line Kit

The VEVOR 6AN kit supplies 20 ft of braided hose with an inner diameter of .34 in and an outer diameter of .54 in. It includes twelve swivel hose ends in straight, 45 degree, 90 degree and 180 degree angles plus two hose separators and ten sealing rings. The assembly is built for diesel, gasoline and transmission fluid but excludes E85 fuel.

Pressure and Temperature Limits

The hose withstands a maximum working pressure of 500 psi and a burst pressure of 2000 psi. It operates from -40°F to 257°F, covering extreme cold and high engine bay heat. These ratings define the safe envelope for fuel, oil and cooler circuits.

6AN Sizing Decides Fitment

The 6AN designation with .34 in inner diameter determines whether this kit matches the required port and adapter dimensions. Builders needing a different AN size or a larger bore must select another kit.

Highlights

  • Versatile fuel system compatibility for turbine, transmission and cooler lines
  • Three-layer nylon, stainless braid and CPE rubber construction handles 500 psi working pressure
  • 2000 psi burst rating and -40 °F to 257 °F range ensure extreme-condition reliability
  • Twelve swivel fittings in straight, 45°, 90° and 180° angles simplify custom routing
  • Twenty-foot length with .34 in inner diameter supplies ample reach for most installations

Specifications

TypeOther Appliances
Width9.06

Questions about this item

Which 6AN kit length and fitting mix covers a typical engine-bay run?

The 20 ft line with twelve swivel ends — four straight, two each at 45°, 90° and 180° — plus two separators and ten sealing rings covers most routing needs.

What does the 500 psi working pressure mean once the hose is clamped on a fuel system?

It rates the maximum steady pressure the CPE inner tube and stainless braid can handle in service; burst pressure is 2000 psi.

Does the 6AN thread match standard AN fittings and what flow does the .34 in bore allow?

Yes, 6AN threads are industry-standard AN; the .34 in inner diameter sets the flow capacity for gasoline, diesel or transmission fluid.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.