VEVOR
VEVOR 680 Lbs Steel Garden Cart 10" Tires Mesh Sides 180° Handle
Heavy-duty steel garden cart carries up to 680 lbs on 10" tires with removable mesh sides and a 180° rotating handle
- TypeOther Appliances
- Width20.87
- Hauls up to 680 lbs in a single trip
- Converts between fenced and flatbed modes for loose or bulky loads
- Q235 steel frame with three support beams resists corrosion outdoors
- 180° rotating handle plus T-shaped hitch bar suit push, pull or tow use
- 10-inch rubber tyres on 860 × 457 mm bed navigate rough ground easily
680 lb Capacity Garden Cart
This steel garden cart transports soil, stones and heavy tools in a single trip thanks to its 680 lb load rating. The 2-in-1 design converts between a fenced cart and a flatbed with a 3.33 cu. ft. load bed. It is built for gardeners and landscapers who move bulky materials across yards, worksites or allotments.
Q235 Steel Frame Powder Coated
The cart uses high-strength Q235 steel with three support beams on the base and a powder-coated surface that resists corrosion during long-term outdoor use. Four 10 inch rubber tyres roll on a front wheel bracket and rear wheel bracket for stable movement. The 180° rotating handle lets you pull the wagon from multiple angles without awkward repositioning.
180 Degree Rotating Handle
A T-shaped hitch bar and 180° rotating handle allow the cart to be pulled by hand or towed behind a suitable vehicle. Inner dimensions measure 830 x 435 x 205 mm, while overall dimensions are 1700 x 480 x 515 mm. The unit weighs 16 kg and ships with side panels, front and rear panels, base plate, brackets, tyres, handle, hitch bar and screw kit.
Highlights
- Hauls up to 680 lbs in a single trip
- Converts between fenced and flatbed modes for loose or bulky loads
- Q235 steel frame with three support beams resists corrosion outdoors
- 180° rotating handle plus T-shaped hitch bar suit push, pull or tow use
- 10-inch rubber tyres on 860 × 457 mm bed navigate rough ground easily
Specifications
| Type | Other Appliances |
|---|---|
| Width | 20.87 |
Questions about this item
How do I assemble the 860 x 457 mm base plate and fit the 10-inch tires without cross-threading the screw kit?
Bolt the front and rear wheel brackets to the base plate first, then attach each 10-inch tire to its axle using the supplied nuts; tighten in a star pattern so the 16 kg frame stays square.
Which parts of the Q235 steel frame and mesh sides will need attention after repeated outdoor use?
The powder-coated Q235 steel resists corrosion, but inspect the welds on the three support beams and the mesh panel latches each season; touch up any scratched coating to prevent rust.
At what load does the 180° rotating handle become difficult to steer on soft ground?
The handle pivots 180° for tight turns, yet steering effort rises sharply once the 680 lb capacity is approached, especially on loose soil where the 10-inch tires sink.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
