VEVOR
VEVOR 60" Farm Jack Hoist with Base 7000 lbs
Manual 60-inch farm jack lifts up to 7,000 lbs with a 5.12-to-54.33-inch range and a stabilising base included
- Width12.4
- TypeFloor Jacks
- Vehicle TypeAutomotive
- Lifts up to 7000 lbs for heavy farm tasks
- 60 inch lifting height reaches tall equipment
- Manual operation needs no power source
- Structural steel build resists wear and corrosion
- Wide 12.4 inch base adds stability on soft ground
60-Inch Manual Farm Jack
The VEVOR 60-inch farm jack is a manual lifting tool rated for a maximum load capacity of 7000 lbs. Its structural steel construction provides a lifting range from 5.12 inches up to 54.33 inches. This jack suits agricultural, automotive and off-road recovery tasks where hydraulic power is unavailable. The included base plate adds stability on soft or uneven ground surfaces.
Sustained Load Behaviour
Under continuous load the mechanical ratchet mechanism holds position without hydraulic drift or pressure loss. The operator controls lift and lower speeds entirely through manual handle effort. There is no fluid to overheat, so performance remains consistent during extended winching or holding operations. The 34.2 lb net weight allows one person to reposition the jack between lifts.
Thermals Noise and Power
Manual operation produces zero motor noise, zero electrical draw and zero heat generation from the tool itself. The only audible sound is the ratchet click during handle strokes. No battery, compressor or hydraulic fluid is required, eliminating leak risk and power-source constraints. Structural steel components dissipate ambient temperature naturally during outdoor use.
Highlights
- Lifts up to 7000 lbs for heavy farm tasks
- 60 inch lifting height reaches tall equipment
- Manual operation needs no power source
- Structural steel build resists wear and corrosion
- Wide 12.4 inch base adds stability on soft ground
Specifications
| Width | 12.4 |
|---|---|
| Type | Floor Jacks |
| Vehicle Type | Automotive |
Questions about this item
How much force is needed to operate the 7000 lbs capacity jack during extended use?
The jack uses a manual lifting method so effort depends on the load; at the full 7000 lbs rating you will apply significant force on the handle throughout the 5.12 to 54.33 inch range.
What surface or mounting does the 60 inch farm jack require to stay stable?
The included base provides a 5.1 x 9.4 inch footprint; it must sit on firm level ground or a steel plate to prevent sinking or tipping while lifting.
Will the 5.12 inch minimum height clear the axle on a vintage tractor with low ground clearance?
The lowest lift point is 5.12 inches so the jack cannot engage anything lower; you would need to raise the axle first with blocks or a different jack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



