VEVOR
VEVOR 6-Piece Aluminum Silk Screen Printing Kit 10x14in 110 Mesh
Six 10x14 inch aluminum frames with 110 mesh polyester screens and sealing tape for DIY textile printing
- TypeOther Appliances
- Width11.02
- Create detailed prints with 110-count polyester mesh
- Six aluminum alloy frames ready for multi-colour work
- Laser-welded frames resist deformation during repeated use
- High-tension 15±0.5N nylon mesh ensures clean ink transfer
- Included sealing tape prevents edge leaks on every frame
6-Piece 110 Mesh Screen Printing Kit
This kit supplies six aluminum alloy frames with 110-count polyester mesh for textile and flat-stock printing. Each frame measures 10 by 14 inches with a 0.8 inch profile and uses bi-component glue to lock the mesh at 15±0.5 N tension. The set includes sealing tape and weighs 3.7 lbs total.
Capacity and headroom for multi-colour runs
Six frames give enough screens for a small multi-colour job or repeated single-colour batches without reclaiming between prints. The 110 mesh count handles standard plastisol and water-based inks on T-shirts, tote bags and poster board. Very fine halftones or high-detail line work will exceed the mesh resolution and require a higher count not included here.
Upgrades from single-frame starter sets
Makers moving up from one or two wooden frames gain registration consistency across all six aluminum units and the sealed edges that prevent ink creep. The jump is worth it when you run repeat orders or need to keep several designs ready at once. Hobbyists who only print occasional one-off shirts will not use the extra frames.
Highlights
- Create detailed prints with 110-count polyester mesh
- Six aluminum alloy frames ready for multi-colour work
- Laser-welded frames resist deformation during repeated use
- High-tension 15±0.5N nylon mesh ensures clean ink transfer
- Included sealing tape prevents edge leaks on every frame
Specifications
| Type | Other Appliances |
|---|---|
| Width | 11.02 |
Questions about this item
Will the 10x14 inch frames fit on my existing 10x14 inch printing press?
Yes, the frames measure 10 by 14 inches externally, matching standard platens of that size.
How can I confirm the 110 mesh frames are tensioned correctly at 15±0.5N before printing?
The mesh should feel drum-tight with minimal deflection when pressed; ink should pass cleanly without edge leakage thanks to the bi-component glue bond.
Does the kit include emulsion, squeegees or ink, or just the 6 frames and sealing tape?
The box contains only the 6 aluminum alloy frames with 110 count polyester mesh plus one roll of sealing tape; emulsion, squeegees and ink are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
