VEVOR
VEVOR 6 kW 240 V Sauna Heater SCA-60BS Stainless Steel
Heats 176.5 to 317.8 cu.ft sauna rooms with a 6 kW 240 V stainless steel stove and mechanical dials
- TypeOther Appliances
- Heats 176.5 to 317.8 cu.ft rooms with 6 kW 240 V power
- 304 stainless steel body resists corrosion in humid sauna conditions
- 304 stainless steel heating element gives quick even heat distribution
- Mechanical dials provide simple temperature and duration control
- Pre-drilled bracket and mounting hardware simplify installation
6 kW Sauna Heater for 5–9 m³ Rooms
This 240 V electric sauna stove delivers 6 kW of heating power and is designed for rooms between 176.5 and 317.8 cu.ft. It requires 10 to 15 kg of sauna stones, which are not included, to provide even heat distribution. The body and heating element are constructed from 304 stainless steel for corrosion resistance.
Suits Home and Commercial Use, Not Small Spaces
Mechanical dials give simple control over temperature and session duration for residential, hotel or leisure venues. Builders fitting rooms below 5 m³ or above 9 m³ should look at a different capacity. Installations without a 240 V supply cannot use this heater.
6 kW at 240 V Decides Fit
The single specification that determines suitability is the 6 kW rating at 240 V, which matches the stated room volume of 176.5 to 317.8 cu.ft. Verify your electrical supply and room size before purchase. Stones weighing 10 to 15 kg must be sourced separately.
Highlights
- Heats 176.5 to 317.8 cu.ft rooms with 6 kW 240 V power
- 304 stainless steel body resists corrosion in humid sauna conditions
- 304 stainless steel heating element gives quick even heat distribution
- Mechanical dials provide simple temperature and duration control
- Pre-drilled bracket and mounting hardware simplify installation
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What electrical supply does the SCA-60BS require to operate?
The heater runs on a 240 V supply and draws 6 kW, so a dedicated circuit with matching voltage and adequate amperage is needed before installation.
Will the 304 stainless steel heating element withstand the humidity of an older sauna room?
Yes, the 304 stainless steel element and SUS430 body are chosen for high corrosion resistance in humid environments, so they handle the moisture found in existing sauna rooms.
How can I confirm the heater is reaching the correct temperature after I wire it up?
Use the mechanical temperature dial to set the desired level; the indicator light shows when the element is active, and the room should reach a steady heat within the 176.5 to 317.8 cu.ft volume range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
