We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey ductile-iron bench vise on 360 swivel base, two-way jaws, large anvil

VEVOR

VEVOR 6.5" Bench Vise 360° Swivel Base Two-way Jaw Ductile Iron

SKU CH-H8K2-RZRJF MPN 6.5

A 6.5 inch ductile iron bench vise with a 360 degree locking swivel base, two-way jaws opening to 6.5 inches forward and 9.3 inches reverse, 3.5 inch throat depth, and a 2.8 by 3 inch anvil.

  • TypeOther
  • 360° swivel base lets you position work at any angle
  • Ductile iron construction withstands heavy clamping forces
  • Two-way jaws grip both flat stock and round pipe up to 2.8
  • 57" jaw opening handles large workpieces with ease
  • 5" throat depth provides reach for deeper components

Bench vise construction and mounting

The VEVOR bench vise is built from ductile iron and mounts on a 360-degree swivel base with a locking mechanism. It provides a 6.57-inch jaw width and a 6.5-inch forward jaw opening for standard clamping tasks. A reverse jaw opening of 9.3 inches extends capacity for larger workpieces. The unit weighs 28 lbs and measures 14.4 by 6.5 by 7.4 inches overall.

Two-way jaw design and anvil use

The flexible two-way jaws allow clamping in both forward and reverse orientations to suit different workpiece shapes. An integrated anvil measuring 2.8 by 3 inches supports light hammering and forming operations. Pipe clamping capacity ranges from 0.6 to 2.8 inches for round stock. Buyers who need a stationary base without rotation or a larger throat depth for deep parts should consider other options.

Throat depth and jaw opening limits

The 3.5-inch throat depth determines how far a workpiece can sit back from the jaw face while still being clamped. Combined with the 6.5-inch forward and 9.3-inch reverse openings, this defines the maximum size and reach for items held in the vise. U-shaped steel guide rods maintain jaw alignment during use.

Highlights

  • 360° swivel base lets you position work at any angle
  • Ductile iron construction withstands heavy clamping forces
  • Two-way jaws grip both flat stock and round pipe up to 2.8
  • 57" jaw opening handles large workpieces with ease
  • 5" throat depth provides reach for deeper components

Specifications

TypeOther

Questions about this item

What size bench holes or mounting pattern does the 360° swivel base require?

The base mounts through four bolt holes on a 14.4" × 6.5" footprint; drill matching holes in a bench at least 1.5" thick to handle the 28 lb weight.

Which step do people skip when locking the swivel base after positioning the vise?

After rotating to the desired angle, the locking handle must be tightened fully until the base cannot shift; a loose handle lets the 360° rotation move under load.

What wear items on the two-way jaws and U-shaped guide rod will need attention over time?

The reversible jaw faces and the guide rod bearing surfaces wear; replace jaw inserts when the 6.57" opening no longer grips squarely and lubricate the rod when motion feels gritty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.