VEVOR
VEVOR 50A RV Extension Cord 50ft 6/3+8/1 Copper N14-50 Handles
A 50-foot, 50-amp extension cord with all-copper 6/3+8/1 conductors, STW jacket and N14-50 ends rated for -40 °F to 140 °F
- Delivers 50 A at 125/250 V for high-draw RV appliances
- 50 ft STW jacketed cord reaches distant pedestals with ease
- All-copper 6 AWG/3C + 8 AWG/1C conductors minimise voltage drop
- Ergonomic handles on both plugs simplify connection in tight bays
- Operates from -40 °F to 140 °F for year-round reliability
50A RV Extension Cord 50ft
This 50-amp extension cord extends power up to 50 feet for trailers, motorhomes and campers. It uses 6AWG three-conductor plus 8AWG one-conductor all-copper wire inside an STW jacket. The cord carries ETL approval for safety compliance.
N14-50 plug limits at 50A 125/250V
The male N14-50P and female N14-50R connectors are rated for 50 amps at 125 to 250 volts. They suit most welders and RV pedestals using that standard. The cord operates from -40°F to 140°F, so extreme cold or heat remains within specification.
6/3 + 8/1 copper gauge decides capacity
The 6AWG/3C + 8AWG/1C copper construction determines the 50-amp continuous rating. Buyers needing higher amperage or a different plug configuration cannot use this cord. The 35.4 lb weight and 16.1 x 16.1 x 6.7 inch coil size affect portability and storage.
Highlights
- Delivers 50 A at 125/250 V for high-draw RV appliances
- 50 ft STW jacketed cord reaches distant pedestals with ease
- All-copper 6 AWG/3C + 8 AWG/1C conductors minimise voltage drop
- Ergonomic handles on both plugs simplify connection in tight bays
- Operates from -40 °F to 140 °F for year-round reliability
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose the 50 ft length or look for a shorter version?
The 50 ft length extends power up to 15.24 m from the source. If your site power is closer, a shorter cord reduces weight and voltage drop, but this model is only offered at 50 ft.
What does the 50 A rating mean when I plug it into my RV?
The cord is rated for 50 A continuous current at 125/250 V, matching a standard 50 A RV shore-power service so both hot legs can deliver full power simultaneously.
The cord uses an N14-50 plug — what does that cap in practice?
The N14-50P male and N14-50R female connectors are the industry standard for 50 A, 125/250 V RV and welder outlets, limiting use to receptacles wired for that exact configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



