We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50 ft dryer extension cord coiled in non-woven bag with PVC tie

VEVOR

VEVOR 50 ft NEMA 14-30P to 14-30R Dryer Extension Cord 30A 125/250V

SKU CH-FHWW-TZ00N

A 50 ft 30 A extension cord with NEMA 14-30P to 14-30R connectors, 10 AWG pure copper wire and STW insulation for indoor or outdoor use

  • TypeOther Appliances
  • Width13.58
  • 50 ft reach extends dryer or EV charger connection
  • 30 A 10 AWG pure copper cable delivers 7500 W stable power
  • STW jacket rated -20 °C to 60 °C withstands rain and sun
  • NEMA 14-30P to 14-30R fits standard 4-prong dryer outlets
  • Includes non-woven bag and PVC tie for tidy storage

50 ft NEMA 14-30 Extension Cord

This 50 ft heavy-duty cord carries a 30A rating at 125/250V using 10AWG pure copper conductors. It connects a NEMA 14-30P plug to a NEMA 14-30R receptacle for high-power appliances. The STW jacket resists rain, humidity and intense sunlight across a -20 to 60 °C operating range. A black non-woven bag and PVC cable tie are included for storage.

Suits dryers and Level 2 EV chargers

Buyers needing a 30A link between a dryer outlet and an electric vehicle charger such as a Tesla Model 3, S, X or Y will find the correct plug geometry and ampacity here. The cord also serves any 14-30 appliance that must sit farther from the wall socket than the factory lead allows. It is not for circuits rated above 30A, for 50A NEMA 14-50 equipment, or for permanent in-wall wiring installations.

Verify outlet, breaker and device limits

Confirm the existing receptacle is a NEMA 14-30R and that the circuit breaker is 30A. Check that the appliance or EV charger draws 30A or less and accepts a 14-30P plug. Ensure the 50 ft length does not create excessive voltage drop for the connected load. The cord weighs 17.2 lbs, so plan routing and support accordingly.

Highlights

  • 50 ft reach extends dryer or EV charger connection
  • 30 A 10 AWG pure copper cable delivers 7500 W stable power
  • STW jacket rated -20 °C to 60 °C withstands rain and sun
  • NEMA 14-30P to 14-30R fits standard 4-prong dryer outlets
  • Includes non-woven bag and PVC tie for tidy storage

Specifications

TypeOther Appliances
Width13.58

Questions about this item

What outlet and plug does my dryer or EV charger need to match the NEMA 14-30 ends on this cord?

Both ends are NEMA 14-30, so the wall receptacle and the appliance inlet must each be a 4-prong 14-30 configuration rated for 30 A at 125/250 V.

Can I keep using my existing 10 AWG dryer circuit with this 50 ft extension without exceeding the 30 A rating?

Yes, the cord uses 10 AWG copper conductors rated for 30 A, matching a standard 30 A dryer branch circuit; total run length simply adds voltage drop, which stays within limits for typical dryer loads.

How can I verify the cord is delivering full power after I plug in my dryer or EV charger?

Check that the appliance runs at its normal heating or charging rate and that the plug ends stay cool to the touch during operation; a 7500 W load at 250 V should draw close to 30 A without overheating the connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.