VEVOR
VEVOR 5 in Swivel Plate Casters Set of 4 450 lbs PVC Wheels
Four 5-inch PVC swivel casters with dual ball bearings, 360° rotation, A/B brakes and 450 lbs capacity per wheel
- TypeOther Appliances
- Width11.61
- Silent movement from dual ball bearings
- 360° swivel with A/B locking brakes
- 450 lbs capacity per caster wheel
- Non-marking PVC protects floor surfaces
- Includes 16 screws, nuts and washers
What these casters do
This set of four 5 inch swivel plate casters adds mobility to carts, workbenches and furniture. Each wheel supports 450 lbs, giving a combined capacity of 1800 lbs for a four corner load. The dual ball bearing raceway enables 360 degree rotation for tight manoeuvring. An integrated A/B brake locks both wheel rotation and swivel motion for stationary stability.
Capacity and limits
The PVC tread rolls quietly on smooth floors and will not mark hardwood, tile or epoxy coatings. Load rating is per caster, so total weight must be divided evenly across all four units. Wheels measure 127 mm diameter by 32 mm width with a 10 mm axle. The assembly sits 155 mm tall once mounted, adding that height to the base object.
Included hardware and setup
The package supplies sixteen M8 screws, nuts, flat washers and spring washers plus two wrenches for immediate installation. A pair of cotton gloves protects hands during assembly and a user manual illustrates the mounting pattern. No additional fasteners or tools are required to bolt the plates to a prepared surface.
Highlights
- Silent movement from dual ball bearings
- 360° swivel with A/B locking brakes
- 450 lbs capacity per caster wheel
- Non-marking PVC protects floor surfaces
- Includes 16 screws, nuts and washers
Specifications
| Type | Other Appliances |
|---|---|
| Width | 11.61 |
Questions about this item
Will the 155 mm installation height and 11.61 in width align with the bolt pattern on my existing workbench?
Each caster plate measures 155 mm square with a 64 mm width, so compare those dimensions to your bench hole spacing before mounting.
How can I confirm the A/B locking brakes are engaging properly on all four 5 in PVC wheels after installation?
Press each brake pedal until it clicks; the wheel should resist both rolling and 360° swivel when the lock is fully seated.
Are the 16 M8 screws, 16 nuts, 32 washers and 2 wrenches included sufficient to mount all four casters without extra hardware?
Yes, the box supplies 4 casters plus 16 screws, 16 nuts, 16 flat washers, 16 spring washers, 2 wrenches, gloves and a manual for complete installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



