VEVOR
VEVOR 3HP 11.8CFM Twin Cylinder Air Compressor Pump
Twin-cylinder cast-iron pump delivers 11.8 CFM at 116 PSI with 1300 RPM splash-lubricated operation
- Delivers 11.8 CFM airflow for demanding pneumatic tools
- Twin cast-iron cylinders with aluminium housing dissipate heat efficiently
- Splash oil lubrication reduces wear for smooth, quiet running
- 1300 RPM single-stage design produces up to 116 PSI pressure
- Compact 20 × 17 × 32 cm footprint fits tight workshop spaces
Industrial Twin-Cylinder Compressor Pump
This VEVOR twin-cylinder pump delivers 11.8 CFM at 1300 RPM for workshop air systems. The single-stage design suits garages and light industrial sites that need a steady supply of compressed air. Oil lubrication and large heat sinks keep the aluminium housing cool during extended runs. It replaces worn heads on existing tanks or powers custom compressor builds.
11.8 CFM at 116 PSI maximum pressure
The pump produces 11.8 CFM free-air delivery while the single-stage limit tops out at 116 PSI. At that pressure the unit still turns at 1300 RPM, so belt-driven installations must match the pulley ratio to the motor speed. Buyers who need higher pressure for specialised tools or dual-stage recovery should look elsewhere because this head cannot exceed the stated ceiling.
Handles typical shop air tools with margin to spare
At 11.8 CFM the pump runs nail guns, impact wrenches and spray guns simultaneously without starving them. The 2.2 kW rating and 13.9 kg weight indicate a robust casting that tolerates continuous duty cycles. Demands such as sandblasting cabinets or high-volume paint booths will exceed the single-stage flow and pressure envelope.
Highlights
- Delivers 11.8 CFM airflow for demanding pneumatic tools
- Twin cast-iron cylinders with aluminium housing dissipate heat efficiently
- Splash oil lubrication reduces wear for smooth, quiet running
- 1300 RPM single-stage design produces up to 116 PSI pressure
- Compact 20 × 17 × 32 cm footprint fits tight workshop spaces
Specifications
No published specifications for this item yet.
Questions about this item
What does the 11.8 CFM rating mean when the pump is installed on a tank?
At 1300 rpm the twin-cylinder head displaces 11.8 CFM of free air, so a suitably sized tank will reach working pressure faster than with a smaller pump.
How does the 1300 rpm limit affect the drive setup?
The pump is rated for a maximum of 1300 rpm; the motor pulley must be chosen so the belt speed never exceeds this figure.
What mounting footprint and clearance does the head need?
The aluminium casting measures 7.87" long by 6.7" wide by 12.6" high and weighs 30.6 lbs, so the mounting surface must support that weight and allow space for the large heat-sink fins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
