We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey industrial electric motor, 56C frame, 5/8 inch keyed shaft, dual voltage label, steel housing

VEVOR

VEVOR 2HP Electric Motor 1725 rpm AC 115V/230V 56C Frame 5/8" Keyed Shaft CW/CCW

SKU CH-14RM-RSK3R

A 2HP single-phase motor runs at 1725 rpm on 115V or 230V AC, fits a 56C frame with a 5/8" keyed shaft, and reverses CW/CCW for pumps or farm equipment

  • TypeOther Appliances
  • Width11.22
  • 2 HP motor delivers strong torque for pumps and agricultural machinery
  • Dual-voltage 115V/230V AC input suits standard and higher-voltage supplies
  • Reversible CW/CCW rotation simplifies wiring for varied installations
  • 56C frame with 5/8" keyed shaft fits common mounting patterns
  • CSA-tested rolled steel shell with overload protection ensures durable operation

2 HP 56C Frame Motor

This 2.0 HP single-phase motor delivers 1725 RPM at 60 Hz on 115V or 230V AC supply. It suits agricultural machinery, water pumps and general equipment needing a direct-drive replacement.

Thermals Noise and Power Draw

Overload protection with manual reset guards against excessive current during sustained loads. The rolled steel shell dissipates heat without forced-air noise, keeping operation quiet in workshop settings.

Build Integration Requirements

A 56C face mount with 5/8 inch keyed shaft (1.88 inch length, 0.188 inch keyway) bolts directly to compatible gearboxes or pulleys. Reversible CW/CCW rotation simplifies wiring for either direction.

Highlights

  • 2 HP motor delivers strong torque for pumps and agricultural machinery
  • Dual-voltage 115V/230V AC input suits standard and higher-voltage supplies
  • Reversible CW/CCW rotation simplifies wiring for varied installations
  • 56C frame with 5/8" keyed shaft fits common mounting patterns
  • CSA-tested rolled steel shell with overload protection ensures durable operation

Specifications

TypeOther Appliances
Width11.22

Questions about this item

How do I wire the 56C frame motor for 115V or 230V and set CW/CCW rotation?

Follow the diagram on the nameplate or in the manual to move the internal jumpers for the chosen voltage and swap the two leads that reverse rotation; the 5/8" keyed shaft and 1.15 service factor stay the same.

What maintenance does the 2HP 1725 RPM motor need over time?

Periodically clean dust from the rolled steel shell and vents, check the 5/8" keyed shaft for wear, and press the manual overload reset if the 20.5A/10.5A protection trips.

What limits continuous running of the 1.15 SF motor at full 2HP load?

The 1.15 service factor allows only brief overloads; sustained 2HP output at 1725 RPM will eventually trip the manual-reset overload at 20.5A (115V) or 10.5A (230V).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.