We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 25 ft 10 AWG dryer extension cord with black NEMA 14-30 plugs and storage bag

VEVOR

VEVOR 25 ft Dryer Extension Cord 10AWG 30A NEMA 14-30P to 14-30R

SKU CH-0KJM-6HE08

A 25 ft, 10 AWG heavy-duty cord with NEMA 14-30 connectors delivers 30 A at 125/250 V for dryers or Level 2 EV charging

  • TypeOther Appliances
  • Width12.6
  • 30 A pure copper cable delivers stable power to high-draw appliances
  • 25 ft length extends reach for dryer or EV charger placement
  • STW insulation resists rain, humidity and intense sunlight outdoors
  • NEMA 14-30P to 14-30R connectors fit standard 4-prong dryer outlets
  • 10 AWG gauge supports 7500 W at 125/250 V

Extension cord for dryer and EV charging

This 25 ft heavy-duty cord connects a NEMA 14-30P plug to a NEMA 14-30R receptacle using 10AWG pure copper wire rated for 30A at 125V/250V. It extends the reach of electric dryers and serves as a Level 2 EV charger extension for compatible vehicles when the charging current is set to 30A or below. The STW insulation makes it suitable for both indoor and outdoor use.

Weather-resistant construction and thermal limits

The STW jacket resists rain, humidity and intense sunlight while operating from -20°C to 60°C. At full 30A load the cord delivers up to 7500 W with minimal voltage drop across the 7.6 m length. No active cooling is required and the pure copper conductors run silently during normal operation.

Build integration and included accessories

The cord weighs 8.82 lbs and coils to roughly 295 mm diameter for storage in the supplied non-woven bag with a PVC cable tie. It needs a matching NEMA 14-30 outlet and plug on the appliance or charger side and does not adapt to other connector types. Buyers who need a different plug configuration or a longer run will require a separate solution.

Highlights

  • 30 A pure copper cable delivers stable power to high-draw appliances
  • 25 ft length extends reach for dryer or EV charger placement
  • STW insulation resists rain, humidity and intense sunlight outdoors
  • NEMA 14-30P to 14-30R connectors fit standard 4-prong dryer outlets
  • 10 AWG gauge supports 7500 W at 125/250 V

Specifications

TypeOther Appliances
Width12.6

Questions about this item

How do I install the 25 ft 10AWG cord with NEMA 14-30P and 14-30R ends, and what step is often missed?

Plug the male 14-30P into the 125/250V outlet and the female 14-30R into the appliance, ensuring both 4-prong connections seat fully; the step often missed is verifying the outlet is rated for 30A and 7500W before use.

What maintenance or replacement will the STW 10AWG/4C cable need later?

Inspect the jacket and prongs periodically for cracks, discoloration, or heat damage; replace the cord if the STW insulation shows brittleness or the copper conductors become exposed.

What limit appears first during sustained 30A use?

The 10AWG copper conductors reach their 30A ampacity ceiling, so continuous loads at 7500W will hit the cable's thermal limit before the NEMA 14-30 connectors do.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.