VEVOR
VEVOR 2.1 Gallon Air Compressor 1.2HP 2.2 CFM@90PSI 116PSI Oil-Free
A 2.1 gallon oil-free compressor delivering 2.2 CFM at 90 PSI with a 116 PSI maximum for nailing, spraying and tyre inflation
- TypeOther
- Oil-free motor eliminates maintenance and keeps work areas clean
- 2 CFM at 90 PSI powers nail guns, spray guns and impact wrenches
- Double-cylinder intake with heat-resistant silicone hose speeds up tank fill times
- Twin silencers cut operating noise to 70 dB for quieter workshop use
- Compact 17.7 × 6.5 × 18.5 in footprint and 25.4 lb weight simplify transport and storage
Compact 2.1 Gallon Oil-Free Compressor
This 2.1 gallon air compressor delivers 2.2 CFM at 90 PSI from a 1.2 HP oil-free motor running at 3500 RPM. The 8 litre tank reaches a maximum pressure of 116 PSI and operates on 120 V AC power. It weighs 11.5 kg and measures 45 x 16.5 x 47 cm, making it a portable option for workshop and garage tasks.
Suited for Intermittent Air Tool Use
The unit suits DIY users and light trade work such as tyre inflation, nailing, stapling and spray painting where demand is periodic. Two included silencers lower the operating sound to 70 dB. It is not for continuous high-volume applications such as sandblasting or running large impact wrenches that exceed the 2.2 CFM delivery, nor for environments needing three-phase power.
Steady Output with Thermal Protection
The oil-free pump uses dual cylinders and a 392-rated silicone intake hose with stainless steel braid to sustain flow during repeated cycles. A protection temperature of 150 °C (302 °F) triggers shutdown before overheating, while the maximum bearing pressure of 3.5 MPa sets the structural limit. The working temperature range spans -59 °C to 104 °C, so the compressor maintains consistent pressure in cold and hot conditions alike.
Highlights
- Oil-free motor eliminates maintenance and keeps work areas clean
- 2 CFM at 90 PSI powers nail guns, spray guns and impact wrenches
- Double-cylinder intake with heat-resistant silicone hose speeds up tank fill times
- Twin silencers cut operating noise to 70 dB for quieter workshop use
- Compact 17.7 × 6.5 × 18.5 in footprint and 25.4 lb weight simplify transport and storage
Specifications
| Type | Other |
|---|
Questions about this item
What power supply do I need to run the 1.2 HP motor?
The compressor requires a standard AC 120 V, 60 Hz household outlet.
Will my existing ¼-inch quick-connect air hose fit the regulator outlet?
The unit uses industry-standard fittings, so common ¼-inch hoses and couplers connect directly.
How can I verify the pump is delivering the rated 2.2 CFM at 90 PSI after setup?
Attach a calibrated flow meter at the regulator; it should read 2.2 CFM when the tank gauge shows 90 PSI.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
