We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey industrial electric motor with steel housing, keyed shaft and terminal box

VEVOR

VEVOR 2.0HP Electric Motor 1725RPM 115/230V 143/5T Frame 7/8" Keyed Shaft CW/CCW

SKU CH-ZGQK-E6GJS

Single-phase 2.0 HP motor runs at 1725 RPM on 115/230 V with reversible CW/CCW rotation and a 7/8" keyed shaft

  • TypeOther Appliances
  • Width11.22
  • 0 hp output drives pumps and farm equipment
  • 1725 rpm speed delivers steady torque for continuous duty
  • 115/230 V dual-voltage design suits standard and shop power
  • 143/5T frame with 7/8" keyed shaft fits common mounts
  • CSA-tested steel shell and overload protection extend service life

Motor Overview

The VEVOR 2.0HP single-phase electric motor delivers 1725 RPM at AC 115V/230V 60Hz. It uses a 143/5T frame with a 7/8" keyed shaft measuring 2.25" in length and a .188" keyway. The unit weighs 44.1 lbs and measures 14.2 x 9.1 x 8.3 inches.

Suitability

This motor suits users needing a reversible CW/CCW general-purpose drive for water pumps, agricultural machinery or air compressors. It is not for applications requiring three-phase power, a different frame size, a non-keyed shaft or a speed other than 1725 RPM.

Installation Checklist

Verify your supply voltage matches 115V or 230V single-phase 60Hz and that the starter can handle 20.5A or 10.5A full-load current. Confirm the 143/5T mounting pattern, 7/8" keyed shaft dimensions and 2.25" shaft length fit your driven equipment. Ensure overload protection with manual reset is compatible with your control circuit.

Highlights

  • 0 hp output drives pumps and farm equipment
  • 1725 rpm speed delivers steady torque for continuous duty
  • 115/230 V dual-voltage design suits standard and shop power
  • 143/5T frame with 7/8" keyed shaft fits common mounts
  • CSA-tested steel shell and overload protection extend service life

Specifications

TypeOther Appliances
Width11.22

Questions about this item

What voltage supply must I already have to run this 115/230 V motor?

The motor operates on single-phase AC at 115 V or 230 V, 60 Hz. At 115 V it draws 20.5 A full-load; at 230 V it draws 10.5 A, so your circuit and wiring must support the chosen voltage.

Will the 7/8" keyed shaft and 143/5T frame bolt directly to my existing pump or compressor?

The shaft is 7/8" diameter, 2.25" long with a 0.188" keyway. The 143/5T frame has standard NEMA mounting dimensions, so it matches equipment built for that frame size and shaft spec.

How do I verify the motor is running correctly after wiring it?

Confirm the shaft spins at 1725 RPM in the desired direction — CW or CCW — by briefly applying power. The overload protector should not trip under normal load, and the motor should reach speed smoothly without unusual noise or vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.