VEVOR
VEVOR 12V Diaphragm Pump 3.5 GPM 50 PSI NMDP33-G35-50-12
A 12 V diaphragm pump delivering 3.5 GPM at 50 PSI with an adjustable 40 to 100 PSI switch, overheat protection and a quiet copper motor for RV or marine use
- TypeOther Appliances
- Width6.5
- High flow of 3.5 GPM at 50 PSI for strong water delivery
- Adjustable 40 to 100 PSI switch activates pump on demand
- Quiet copper motor with noise-reducing base minimises disruption
- CE and ROHS certified with overheat and overload protection
- Compact 8.15 x 5.43 x 4.92 in design fits tight spaces
12 V diaphragm pump for mobile use
The VEVOR NMDP33-G35-50-12 is a 12 V DC diaphragm pump built for mobile and off-grid water systems. It delivers up to 3.5 GPM (13.25 L/min) at 50 PSI and fits standard 1/2 inch MNPT fittings. The pump is designed for RV, marine, camper and food-truck installations where reliable pressure is needed.
Suits constant-pressure demand.
This unit suits users who want automatic on-demand pressure from 40 to 100 PSI without a separate accumulator tank. The three-chamber design and pressure switch start and stop the motor as taps open and close. Buyers who need continuous high-volume transfer or flows above 3.5 GPM should consider a different pump class.
104 W at 12 V DC sets wiring and battery needs
The pump draws 104 W from a 12 V supply, so cable gauge and fuse rating must handle the corresponding current. Overheat and overload protection are built in, and the switch is rated for 200000 cycles. Verify that your electrical system can sustain this load before purchase.
Highlights
- High flow of 3.5 GPM at 50 PSI for strong water delivery
- Adjustable 40 to 100 PSI switch activates pump on demand
- Quiet copper motor with noise-reducing base minimises disruption
- CE and ROHS certified with overheat and overload protection
- Compact 8.15 x 5.43 x 4.92 in design fits tight spaces
Specifications
| Type | Other Appliances |
|---|---|
| Width | 6.5 |
Questions about this item
What 12 V power source must I already have to run the NMDP33-G35-50-12 pump?
You need a DC 12 V supply capable of at least 104 W; the pump draws that power directly from the 12 V system in your RV, boat or camper.
Will the 1/2'' MNPT ports on this pump connect to the 1/2'' fittings on my existing plumbing?
Yes — the inlet and outlet are 1/2'' MNPT with a 20.955 mm outer diameter, matching standard 1/2'' NPT plumbing used in most RV and marine installations.
How can I confirm the pump is operating correctly after installation?
Open a faucet and verify the pump starts automatically, delivers 3.5 GPM at 50 PSI, then shuts off when the faucet is closed; the pressure switch is tested to 200000 cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
