VEVOR
VEVOR 10 L 60 PSI Spray Paint Pressure Pot Tank with 1.5 mm & 4 mm Nozzles
A 10 L pressure pot rated to 60 psi with two spray guns and 1.5 mm plus 4 mm nozzles for paint or resin work
- TypeOther Appliances
- Width11.42
- 10 L capacity reduces refill stops during large spraying jobs
- 60 psi maximum pressure delivers consistent atomisation for even coats
- Two included spray guns with 1.5 mm and 4 mm nozzles cover fine detail and high-viscosity materials
- 1/4 in air inlet and 3/8 in fluid outlet simplify compressor and gun connections
- 1 kg net weight keeps the tank stable yet portable on site
10 L pressure pot with dual nozzles
The VEVOR 10 L spray paint pressure pot delivers a 60 PSI maximum working pressure for industrial, automotive and architectural coating tasks. It includes two spray guns fitted with 1.5 mm and 4 mm nozzles to handle a range of material viscosities. A 1/4 inch air inlet, 3/8 inch fluid outlet and 1/4 inch outlet port simplify connection to a compressed air supply. The 10 litre tank capacity supports extended spraying sessions without frequent refills.
Suited for high-volume coating, not detail work
Painters covering large surfaces such as walls, vehicles or resin castings will benefit from the generous capacity and adjustable fan pattern. The three control knobs regulate air pressure, fluid flow and spray width for consistent atomisation. Users who only need occasional touch-ups or fine-art detail may find the tank size and 20.1 lb weight excessive for their workflow. A spray gun with a 4 mm or larger nozzle is required for latex paint.
Integrates with a compressed air system
The pot connects to a shop compressor via the 1/4 inch air inlet and feeds material through the 3/8 inch fluid outlet to the included guns. Its 52 cm height and 24 cm bucket diameter sit on a bench or cart without dominating the workspace. The 10 ml leak repair sealant and manual are included for maintenance. An adequate air supply at the rated pressure is the only external requirement for operation.
Highlights
- 10 L capacity reduces refill stops during large spraying jobs
- 60 psi maximum pressure delivers consistent atomisation for even coats
- Two included spray guns with 1.5 mm and 4 mm nozzles cover fine detail and high-viscosity materials
- 1/4 in air inlet and 3/8 in fluid outlet simplify compressor and gun connections
- 1 kg net weight keeps the tank stable yet portable on site
Specifications
| Type | Other Appliances |
|---|---|
| Width | 11.42 |
Questions about this item
What compressor fitting do I need to supply the 1/4 in air inlet?
The pot has a 1/4 in air inlet, so your compressor hose or regulator must terminate in a matching 1/4 in connector to deliver up to 60 psi.
Can the included 1.5 mm and 4 mm nozzle guns handle the same coatings as my existing 2 mm gun?
The 1.5 mm gun suits thinner finishes while the 4 mm gun covers latex and heavier metallic paints; a 2 mm gun would sit between those viscosities.
How do I verify the tank reaches the rated 60 psi safely after hook-up?
Pressurise slowly and watch the gauge; the needle should stabilise at 60 psi with no hissing from the lid seal or the 3/8 in fluid outlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013206BTC
In stock